diff options
Diffstat (limited to 'pinebookpro-a48441783fc6f15bd076dc0d01ecc2913d79260a.patch')
| -rw-r--r-- | pinebookpro-a48441783fc6f15bd076dc0d01ecc2913d79260a.patch | 5720 |
1 files changed, 5720 insertions, 0 deletions
diff --git a/pinebookpro-a48441783fc6f15bd076dc0d01ecc2913d79260a.patch b/pinebookpro-a48441783fc6f15bd076dc0d01ecc2913d79260a.patch new file mode 100644 index 0000000..c72ba55 --- /dev/null +++ b/pinebookpro-a48441783fc6f15bd076dc0d01ecc2913d79260a.patch @@ -0,0 +1,5720 @@ +--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.txt ++++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.txt +@@ -0,0 +1,37 @@ ++cw2015_battery ++~~~~~~~~~~~~~~~~ ++ ++The cellwise CW2015 is a shuntless single/multi-cell battery fuel gauge. ++ ++Required properties : ++ - compatible : "cellwise,cw2015" ++ - cellwise,bat-config-info : Binary battery info blob ++ ++Optional properties : ++ - cellwise,monitor-interval : Measurement interval in seconds ++ - cellwise,voltage-divider : Voltage divider for multi-cell packs, ++ specified as two integer values <high side>, <low side> in ohms. ++ - cellwise,virtual-power : Default to disconnected battery state (gauge in pack mode) ++ - cellwise,design-capacity : Design capacity of the battery cell in milliampere hours ++ - cellwise,alert-level : Low battery alarm level in percent ++ ++Example: ++ cw2015@62 { ++ status = "okay"; ++ compatible = "cellwise,cw201x"; ++ reg = <0x62>; ++ cellwise,bat-config-info = < ++ 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 ++ 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 ++ 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 ++ 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 ++ 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 ++ 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D ++ 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB ++ 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 ++ >; ++ cellwise,monitor-interval = <5>; ++ cellwise,virtual-power; ++ cellwise,design-capacity = <9800>; ++ power-supplies = <&mains_charger>, <&usb_charger>; ++ } +--- a/arch/arm64/boot/dts/rockchip/Makefile ++++ b/arch/arm64/boot/dts/rockchip/Makefile +@@ -25,6 +25,7 @@ + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb ++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb +--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +@@ -0,0 +1,1092 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. ++ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> ++ */ ++ ++/dts-v1/; ++#include <dt-bindings/input/linux-event-codes.h> ++#include <dt-bindings/pwm/pwm.h> ++#include <dt-bindings/usb/pd.h> ++//#include <dt-bindings/leds/common.h> ++#include "rk3399.dtsi" ++#include "rk3399-opp.dtsi" ++ ++/ { ++ model = "Pine64 Pinebook Pro"; ++ compatible = "pine64,pinebook-pro", "rockchip,rk3399"; ++ ++ edp_panel: edp-panel { /* "boe,nv140fhmn49" */ ++ compatible = "boe,nv140fhmn49", "simple-panel"; ++ backlight = <&backlight>; ++ power-supply = <&vcc3v3_s0>; ++// pinctrl-names = "default"; ++// pinctrl-0 = <&panel_en>; ++ enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; ++ prepare-delay-ms = <20>; ++ enable-delay-ms = <20>; ++ status = "okay"; ++ ++ ports { ++ #address-cells = <0x01>; ++ #size-cells = <0x00>; ++ port@0 { ++ panel_in_edp: endpoint@0 { ++ remote-endpoint = <&edp_out_panel>; ++ }; ++ }; ++ }; ++ }; ++ ++ chosen { ++ bootargs = "earlycon=uart8250,mmio32,0xff1a0000"; ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwrled &slpled>; ++ ++ /* Hack using active_low as inversion. A real, inverted trigger would be nicer */ ++ green-led { ++ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; ++ label = "green:disk-activity"; ++// function = LED_FUNCTION_POWER; ++ linux,default-trigger = "disk-activity"; ++ default-state = "off"; ++// color = <LED_COLOR_ID_GREEN>; ++ }; ++ ++ red-led { ++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; ++ label = "red:standby"; ++// function = LED_FUNCTION_STANDBY; ++ default-state = "off"; ++ panic-indicator; ++ retain-state-suspended; ++// color = <LED_COLOR_ID_RED>; ++ }; ++ }; ++ ++ reserved-memory { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ drm_logo: drm-logo@00000000 { ++ compatible = "rockchip,drm-logo"; ++ reg = <0x0 0x0 0x0 0x0>; ++ }; ++ }; ++ ++ dc_12v: dc-12v { ++ compatible = "regulator-fixed"; ++ regulator-name = "dc_12v"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <12000000>; ++ regulator-max-microvolt = <12000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ autorepeat; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwrbtn &lidbtn>; ++ ++ power { ++ debounce-interval = <20>; ++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; ++ label = "Power"; ++ linux,code = <KEY_POWER>; ++ wakeup-source; ++ }; ++ ++ lid { ++ debounce-interval = <20>; ++ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; ++ label = "Lid"; ++ linux,code = <SW_LID>; ++ linux,input-type = <EV_SW>; ++ wakeup-source; ++ }; ++ }; ++ ++ backlight: edp-backlight { ++ compatible = "pwm-backlight"; ++ pwms = <&pwm0 0 740740 0>; ++ power-supply = <&vcc3v3_s3>; ++ brightness-levels = < ++ 0 1 2 3 4 5 6 7 ++ 8 9 10 11 12 13 14 15 ++ 16 17 18 19 20 21 22 23 ++ 24 25 26 27 28 29 30 31 ++ 32 33 34 35 36 37 38 39 ++ 40 41 42 43 44 45 46 47 ++ 48 49 50 51 52 53 54 55 ++ 56 57 58 59 60 61 62 63 ++ 64 65 66 67 68 69 70 71 ++ 72 73 74 75 76 77 78 79 ++ 80 81 82 83 84 85 86 87 ++ 88 89 90 91 92 93 94 95 ++ 96 97 98 99 100 101 102 103 ++ 104 105 106 107 108 109 110 111 ++ 112 113 114 115 116 117 118 119 ++ 120 121 122 123 124 125 126 127 ++ 128 129 130 131 132 133 134 135 ++ 136 137 138 139 140 141 142 143 ++ 144 145 146 147 148 149 150 151 ++ 152 153 154 155 156 157 158 159 ++ 160 161 162 163 164 165 166 167 ++ 168 169 170 171 172 173 174 175 ++ 176 177 178 179 180 181 182 183 ++ 184 185 186 187 188 189 190 191 ++ 192 193 194 195 196 197 198 199 ++ 200 201 202 203 204 205 206 207 ++ 208 209 210 211 212 213 214 215 ++ 216 217 218 219 220 221 222 223 ++ 224 225 226 227 228 229 230 231 ++ 232 233 234 235 236 237 238 239 ++ 240 241 242 243 244 245 246 247 ++ 248 249 250 251 252 253 254 255>; ++ default-brightness-level = <200>; ++ status = "okay"; ++ }; ++ ++ panel { ++ vcc_lcd_en_drv: vcc-lcd-en-drv { ++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ panel_en: panel-en { ++ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ vcc_lcd_en: vcc-lcd-en-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; ++// pinctrl-names = "default"; ++// pinctrl-0 = <&vcc_lcd_en_drv>; ++ regulator-name = "vcc_lcd_en"; ++ regulator-enable-ramp-delay = <100000>; ++ vin-supply = <&vcc3v3_sys>; ++ regulator-always-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ sdio_pwrseq: sdio-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rk808 1>; ++ clock-names = "ext_clock"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_enable_h>; ++ power-off-delay-us = <500000>; ++ post-power-on-delay-ms = <100>; ++ ++ /* ++ * On the module itself this is one of these (depending ++ * on the actual card populated): ++ * - SDIO_RESET_L_WL_REG_ON ++ * - PDN (power down when low) ++ */ ++ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wireless-wlan { ++ compatible = "wlan-platdata"; ++ rockchip,grf = <&grf>; ++ wifi_chip_type = "ap6354"; ++ sdio_vref = <1800>; ++ WIFI,host_wake_irq = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; ++ status = "okay"; ++ }; ++ ++ es8316-sound { ++ status = "okay"; ++ compatible = "simple-audio-card"; ++ simple-audio-card,name = "rockchip,es8316-codec"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,mclk-fs = <256>; ++ ++ simple-audio-card,widgets = ++ "Microphone", "Mic Jack", ++ "Headphone", "Headphones", ++ "Speaker", "Speaker"; ++ simple-audio-card,routing = ++ "MIC1", "Mic Jack", ++ "Headphones", "HPOL", ++ "Headphones", "HPOR", ++ "Speaker Amplifier INL", "HPOL", ++ "Speaker Amplifier INR", "HPOR", ++ "Speaker", "Speaker Amplifier OUTL", ++ "Speaker", "Speaker Amplifier OUTR"; ++ ++ simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; ++ simple-audio-card,aux-devs = <&speaker_amp>; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&i2s1>; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&es8316>; ++ }; ++ }; ++ ++ speaker_amp: speaker-amplifier { ++ status = "okay"; ++ compatible = "simple-audio-amplifier"; ++ enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; ++ VCC-supply = <&vcc5v0_host>; ++ sound-name-prefix = "Speaker Amplifier"; ++ }; ++ ++ /* switched by pmic_sleep */ ++ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc1v8_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ vin-supply = <&vcc_1v8>; ++ }; ++ ++ vcc3v3_pcie: vcc3v3-pcie-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_pwr_en>; ++ regulator-name = "vcc3v3_pcie"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&dc_12v>; ++ }; ++ ++ vcc_phy: vcc-phy-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_phy"; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ vcc3v3_sys: vcc3v3-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc_sys>; ++ }; ++ ++ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ ++ vcc5v0_host: vcc5v0-host-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_host_en>; ++ regulator-name = "vcc5v0_host"; ++ regulator-always-on; ++ vin-supply = <&vcc_sys>; ++ }; ++ ++ vcc5v0_typec: vcc5v0-typec-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_typec_en>; ++ regulator-name = "vcc5v0_typec"; ++ vin-supply = <&vcc_sys>; ++ }; ++ ++ vcc_sys: vcc-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&dc_12v>; ++ }; ++ ++ vdd_log: vdd-log { ++ compatible = "pwm-regulator"; ++ pwms = <&pwm2 0 25000 1>; ++ pwm-supply = <&vcc_sys>; ++ regulator-name = "vdd_log"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1400000>; ++ }; ++ ++ mains_charger: dc-charger { ++ compatible = "gpio-charger"; ++ charger-type = "mains"; ++ gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; ++// pinctrl-names = "default"; ++// pinctrl-0 = <&dc_det_gpio>; ++ }; ++ ++ usb_charger: usb-charger { ++ status = "okay"; ++ compatible = "universal-charger"; ++ extcon = <&fusb0>; ++ }; ++}; ++ ++&edp { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&edp_hpd>; ++ force-hpd; ++ ++ ports { ++ edp_out: port@1 { ++ reg = <1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ edp_out_panel: endpoint@0 { ++ reg = <0>; ++ remote-endpoint = <&panel_in_edp>; ++ }; ++ }; ++ }; ++}; ++ ++&cpu_l0 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l1 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l2 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l3 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_b0 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_b1 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_alert0 { ++ temperature = <80000>; ++}; ++ ++&cpu_alert1 { ++ temperature = <95000>; ++}; ++ ++&cpu_crit { ++ temperature = <100000>; ++}; ++ ++&emmc_phy { ++ status = "okay"; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&hdmi { ++ ddc-i2c-bus = <&i2c3>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hdmi_cec>; ++ status = "disabled"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&i2c0 { ++ clock-frequency = <400000>; ++ i2c-scl-rising-time-ns = <168>; ++ i2c-scl-falling-time-ns = <4>; ++ status = "okay"; ++ ++ rk808: pmic@1b { ++ compatible = "rockchip,rk808"; ++ reg = <0x1b>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <21 IRQ_TYPE_LEVEL_LOW>; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk808-clkout2"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc_sys>; ++ vcc2-supply = <&vcc_sys>; ++ vcc3-supply = <&vcc_sys>; ++ vcc4-supply = <&vcc_sys>; ++ vcc6-supply = <&vcc_sys>; ++ vcc7-supply = <&vcc_sys>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc_sys>; ++ vcc10-supply = <&vcc_sys>; ++ vcc11-supply = <&vcc_sys>; ++ vcc12-supply = <&vcc3v3_sys>; ++ vddio-supply = <&vcc1v8_pmu>; ++ ++ regulators { ++ vdd_center: DCDC_REG1 { ++ regulator-name = "vdd_center"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_cpu_l: DCDC_REG2 { ++ regulator-name = "vdd_cpu_l"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: DCDC_REG4 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc1v8_dvp: LDO_REG1 { ++ regulator-name = "vcc1v8_dvp"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v0_touch: LDO_REG2 { ++ regulator-name = "vcc3v0_touch"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc1v8_pmu: LDO_REG3 { ++ regulator-name = "vcc1v8_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc_sdio: LDO_REG4 { ++ regulator-name = "vcc_sdio"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcca3v0_codec: LDO_REG5 { ++ regulator-name = "vcca3v0_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v5: LDO_REG6 { ++ regulator-name = "vcc_1v5"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1500000>; ++ }; ++ }; ++ ++ vcca1v8_codec: LDO_REG7 { ++ regulator-name = "vcca1v8_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v0: LDO_REG8 { ++ regulator-name = "vcc_3v0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcc3v3_s3: vcc_lan: SWITCH_REG1 { ++ regulator-name = "vcc3v3_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_s0: SWITCH_REG2 { ++ regulator-name = "vcc3v3_s0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++ ++ vdd_cpu_b: regulator@40 { ++ compatible = "silergy,syr827"; ++ reg = <0x40>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel1_gpio>; ++ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; ++ regulator-compatible = "fan53555-reg"; ++ regulator-name = "vdd_cpu_b"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ regulator-always-on; ++ regulator-boot-on; ++ vin-supply = <&vcc_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: regulator@41 { ++ compatible = "silergy,syr828"; ++ reg = <0x41>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel2_gpio>; ++ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; ++ regulator-compatible = "fan53555-reg"; ++ regulator-name = "vdd_gpu"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ regulator-always-on; ++ regulator-boot-on; ++ vin-supply = <&vcc_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ i2c-scl-rising-time-ns = <168>; ++ i2c-scl-falling-time-ns = <4>; ++ status = "okay"; ++ ++ clock-frequency = <100000>; ++ ++ es8316: es8316@11 { ++ #sound-dai-cells = <0>; ++ compatible = "everest,es8316"; ++ reg = <0x11>; ++ clocks = <&cru SCLK_I2S_8CH_OUT>; ++ clock-names = "mclk"; ++ }; ++}; ++ ++&i2c3 { ++ i2c-scl-rising-time-ns = <450>; ++ i2c-scl-falling-time-ns = <15>; ++ status = "okay"; ++}; ++ ++ ++ ++&i2c4 { ++ i2c-scl-rising-time-ns = <600>; ++ i2c-scl-falling-time-ns = <20>; ++ status = "okay"; ++ ++ fusb0: fusb30x@22 { ++ compatible = "fcs,fusb302"; ++ reg = <0x22>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&fusb0_int>; ++ fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; ++ vbus-supply = <&vcc5v0_typec>; ++ status = "okay"; ++ connector { ++ compatible = "usb-c-connector"; ++ label = "USB-C"; ++ power-role = "dual"; ++ try-power-role = "sink"; ++ source-pdos = <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; ++ sink-pdos = <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; ++ op-sink-microwatt = <1000000>; ++ extcon-cables = <1 2 5 6 9 10 12 44>; ++ }; ++ }; ++ ++ cw2015@62 { ++ status = "okay"; ++ compatible = "cellwise,cw201x"; ++ reg = <0x62>; ++ cellwise,bat-config-info = < ++ 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 ++ 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 ++ 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 ++ 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 ++ 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 ++ 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D ++ 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB ++ 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 ++ >; ++ cellwise,monitor-interval = <5>; ++ cellwise,virtual-power = <0>; ++ cellwise,design-capacity = <9800>; ++ power-supplies = <&mains_charger>, <&fusb0>; ++ }; ++}; ++ ++&i2s0 { ++ status = "disabled"; ++}; ++ ++&i2s1 { ++ rockchip,i2s-broken-burst-len; ++ rockchip,playback-channels = <8>; ++ rockchip,capture-channels = <8>; ++ #sound-dai-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_8ch_mclk>, <&i2s1_2ch_bus>; ++ status = "okay"; ++}; ++ ++&i2s2 { ++ #sound-dai-cells = <0>; ++ status = "disabled"; ++}; ++ ++&io_domains { ++ status = "okay"; ++ ++ bt656-supply = <&vcc1v8_dvp>; ++ audio-supply = <&vcca1v8_codec>; ++ sdmmc-supply = <&vcc_sdio>; ++ gpio1830-supply = <&vcc_3v0>; ++}; ++ ++&pcie_phy { ++ status = "okay"; ++}; ++ ++&pcie0 { ++ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; ++ num-lanes = <4>; ++ max-link-speed = <2>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_clkreqn_cpm>; ++ vpcie3v3-supply = <&vcc3v3_pcie>; ++ bus-scan-delay-ms = <1000>; ++ status = "okay"; ++}; ++ ++&pmu_io_domains { ++ pmu1830-supply = <&vcc_3v0>; ++ status = "okay"; ++}; ++ ++&cluster1_opp { ++ opp08 { ++ opp-hz = /bits/ 64 <2000000000>; ++ opp-microvolt = <1300000>; ++ }; ++}; ++ ++&pinctrl { ++ buttons { ++ pwrbtn: pwrbtn { ++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ lidbtn: lidbtn { ++ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ dc-charger { ++ dc_det_gpio: dc-det-gpio { ++ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ fusb302x { ++ fusb0_int: fusb0-int { ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ leds { ++ pwrled: pwrled { ++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ slpled: slpled { ++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ lcd-panel { ++ lcd_panel_reset: lcd-panel-reset { ++ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ pcie { ++ pcie_pwr_en: pcie-pwr-en { ++ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ ++ vsel1_gpio: vsel1-gpio { ++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ ++ vsel2_gpio: vsel2-gpio { ++ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ }; ++ ++ sdio-pwrseq { ++ wifi_enable_h: wifi-enable-h { ++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ usb-typec { ++ vcc5v0_typec_en: vcc5v0_typec_en { ++ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ rt5640 { ++ rt5640_hpcon: rt5640-hpcon { ++ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ usb2 { ++ vcc5v0_host_en: vcc5v0-host-en { ++ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ i2s1 { ++ i2s_8ch_mclk: i2s-8ch-mclk { ++ rockchip,pins = <4 0 RK_FUNC_1 &pcfg_pull_none>; ++ }; ++ }; ++ ++ wireless-bluetooth { ++ bt_wake_gpio: bt-wake { ++ rockchip,pins = ++ <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ bt_host_wake_gpio: bt-host-wake { ++ rockchip,pins = ++ <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_reset_gpio: bt-reset { ++ rockchip,pins = ++ <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&pwm0 { ++ status = "okay"; ++}; ++ ++&pwm2 { ++ status = "okay"; ++}; ++ ++&saradc { ++ vref-supply = <&vcca1v8_s3>; ++ status = "okay"; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-mmc-highspeed; ++ cap-sd-highspeed; ++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; ++ disable-wp; ++ sd-uhs-sdr104; ++ max-frequency = <150000000>; ++ vqmmc-supply = <&vcc_sdio>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; ++ status = "okay"; ++}; ++ ++&sdio0 { ++ supports-sdio; ++ bus-width = <4>; ++ disable-wp; ++ cap-sd-highspeed; ++ cap-sdio-irq; ++ keep-power-in-suspend; ++ mmc-pwrseq = <&sdio_pwrseq>; ++ non-removable; ++ num-slots = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; ++ sd-uhs-sdr104; ++ status = "okay"; ++ defer_pcie = <2000>; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ //mmc-hs400-1_8v; ++ mmc-hs200-1_8v; ++ //mmc-hs400-enhanced-strobe; ++ non-removable; ++ status = "okay"; ++}; ++ ++&tcphy0 { ++ extcon = <&fusb0>; ++ status = "okay"; ++}; ++ ++&tcphy1 { ++ status = "okay"; ++}; ++ ++&tsadc { ++ /* tshut mode 0:CRU 1:GPIO */ ++ rockchip,hw-tshut-mode = <1>; ++ /* tshut polarity 0:LOW 1:HIGH */ ++ rockchip,hw-tshut-polarity = <1>; ++ status = "okay"; ++}; ++ ++&u2phy0 { ++ status = "okay"; ++ ++ u2phy0_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy0_host: host-port { ++ phy-supply = <&vcc5v0_host>; ++ status = "okay"; ++ }; ++}; ++ ++&u2phy1 { ++ status = "okay"; ++ ++ u2phy1_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy1_host: host-port { ++ phy-supply = <&vcc5v0_host>; ++ status = "okay"; ++ }; ++}; ++ ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; ++ uart-has-rtscts; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm4345c5"; ++ clocks = <&rk808 1>; ++ clock-names = "lpo"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; ++ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; ++ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; ++ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; ++ max-speed = <1500000>; ++ vbat-supply = <&vcc3v3_sys>; ++ vddio-supply = <&vcc_1v8>; ++ }; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host1_ehci { ++ status = "okay"; ++}; ++ ++&usb_host1_ohci { ++ status = "okay"; ++}; ++ ++&usbdrd3_0 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_0 { ++ status = "okay"; ++ dr_mode = "host"; ++}; ++ ++&usbdrd3_1 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_1 { ++ status = "okay"; ++ dr_mode = "host"; ++}; ++ ++&vopb { ++ status = "okay"; ++}; ++ ++&vopb_mmu { ++ status = "okay"; ++}; ++ ++&vopl { ++ status = "okay"; ++}; ++ ++&vopl_mmu { ++ status = "okay"; ++}; ++ ++&spi1 { ++ status = "okay"; ++ max-freq = <10000000>; ++ ++ spiflash: spi-flash@0 { ++ #address-cells = <0x1>; ++ #size-cells = <1>; ++ compatible = "jedec,spi-nor"; ++ reg = <0x0>; ++ spi-max-frequency = <10000000>; ++ status = "okay"; ++ m25p,fast-read; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ loader@8000 { ++ label = "loader"; ++ reg = <0x0 0x3F8000>; ++ }; ++ ++ env@3f8000 { ++ label = "env"; ++ reg = <0x3F8000 0x8000>; ++ }; ++ ++ vendor@7c0000 { ++ label = "vendor"; ++ reg = <0x7C0000 0x40000>; ++ }; ++ }; ++ }; ++}; +--- a/arch/arm64/configs/pinebook_pro_defconfig ++++ b/arch/arm64/configs/pinebook_pro_defconfig +@@ -0,0 +1,3003 @@ ++CONFIG_LOCALVERSION="-MANJARO-ARM" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_PREEMPT_VOLUNTARY=y ++CONFIG_IRQ_TIME_ACCOUNTING=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_TASKSTATS=y ++CONFIG_TASK_DELAY_ACCT=y ++CONFIG_TASK_XACCT=y ++CONFIG_TASK_IO_ACCOUNTING=y ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_LOG_BUF_SHIFT=23 ++CONFIG_LOG_CPU_MAX_BUF_SHIFT=14 ++CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=15 ++CONFIG_MEMCG=y ++CONFIG_MEMCG_SWAP=y ++CONFIG_BLK_CGROUP=y ++CONFIG_CFS_BANDWIDTH=y ++CONFIG_CGROUP_PIDS=y ++CONFIG_CGROUP_RDMA=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CGROUP_HUGETLB=y ++CONFIG_CPUSETS=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_CGROUP_PERF=y ++CONFIG_CGROUP_BPF=y ++CONFIG_NAMESPACES=y ++CONFIG_USER_NS=y ++CONFIG_CHECKPOINT_RESTORE=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EXPERT=y ++CONFIG_KALLSYMS_ALL=y ++CONFIG_BPF_SYSCALL=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_SLAB_FREELIST_RANDOM=y ++CONFIG_PROFILING=y ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_ARM64_VA_BITS_48=y ++CONFIG_SCHED_MC=y ++CONFIG_SCHED_SMT=y ++CONFIG_NR_CPUS=8 ++CONFIG_HZ_100=y ++CONFIG_SECCOMP=y ++CONFIG_PARAVIRT_TIME_ACCOUNTING=y ++# CONFIG_ARM64_LSE_ATOMICS is not set ++CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y ++CONFIG_CMDLINE="console=ttyAMA0" ++CONFIG_HIBERNATION=y ++CONFIG_PM_DEBUG=y ++CONFIG_PM_TEST_SUSPEND=y ++CONFIG_CPU_IDLE_GOV_LADDER=y ++CONFIG_ARM_CPUIDLE=y ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y ++CONFIG_CPUFREQ_DT=y ++CONFIG_ACPI_CPPC_CPUFREQ=y ++CONFIG_ARM_SCPI_CPUFREQ=y ++CONFIG_ARM_SCPI_PROTOCOL=y ++CONFIG_DMI_SYSFS=y ++CONFIG_EFI_VARS=y ++CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y ++# CONFIG_EFI_ARMSTUB_DTB_LOADER is not set ++CONFIG_EFI_BOOTLOADER_CONTROL=y ++CONFIG_ACPI=y ++CONFIG_ACPI_EC_DEBUGFS=y ++CONFIG_ACPI_DOCK=y ++CONFIG_ACPI_IPMI=m ++CONFIG_ACPI_PCI_SLOT=y ++CONFIG_ACPI_HED=y ++CONFIG_ACPI_CUSTOM_METHOD=y ++CONFIG_PMIC_OPREGION=y ++CONFIG_ACPI_CONFIGFS=m ++CONFIG_VIRTUALIZATION=y ++CONFIG_KVM=y ++CONFIG_VHOST_NET=m ++CONFIG_VHOST_SCSI=m ++CONFIG_VHOST_VSOCK=m ++CONFIG_ARM64_CRYPTO=y ++CONFIG_CRYPTO_SHA1_ARM64_CE=y ++CONFIG_CRYPTO_SHA2_ARM64_CE=y ++CONFIG_CRYPTO_SHA512_ARM64_CE=y ++CONFIG_CRYPTO_SHA3_ARM64=y ++CONFIG_CRYPTO_SM3_ARM64_CE=y ++CONFIG_CRYPTO_SM4_ARM64_CE=y ++CONFIG_CRYPTO_GHASH_ARM64_CE=y ++CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y ++CONFIG_CRYPTO_AES_ARM64_CE_CCM=y ++CONFIG_CRYPTO_AES_ARM64_CE_BLK=y ++CONFIG_CRYPTO_CHACHA20_NEON=y ++CONFIG_CRYPTO_NHPOLY1305_NEON=y ++CONFIG_CRYPTO_AES_ARM64_BS=y ++CONFIG_JUMP_LABEL=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_COMPRESS=y ++CONFIG_UNUSED_SYMBOLS=y ++CONFIG_BLK_DEV_ZONED=y ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_BLK_CMDLINE_PARSER=y ++CONFIG_BLK_WBT=y ++CONFIG_BLK_SED_OPAL=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_AIX_PARTITION=y ++CONFIG_OSF_PARTITION=y ++CONFIG_AMIGA_PARTITION=y ++CONFIG_MAC_PARTITION=y ++CONFIG_BSD_DISKLABEL=y ++CONFIG_MINIX_SUBPARTITION=y ++CONFIG_SOLARIS_X86_PARTITION=y ++CONFIG_UNIXWARE_DISKLABEL=y ++CONFIG_LDM_PARTITION=y ++CONFIG_SGI_PARTITION=y ++CONFIG_SUN_PARTITION=y ++CONFIG_KARMA_PARTITION=y ++CONFIG_IOSCHED_BFQ=y ++CONFIG_BFQ_GROUP_IOSCHED=y ++CONFIG_BINFMT_MISC=y ++CONFIG_KSM=y ++CONFIG_CLEANCACHE=y ++CONFIG_FRONTSWAP=y ++CONFIG_CMA=y ++CONFIG_CMA_DEBUGFS=y ++CONFIG_ZSWAP=y ++CONFIG_ZBUD=y ++CONFIG_Z3FOLD=y ++CONFIG_ZSMALLOC=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_PACKET_DIAG=m ++CONFIG_UNIX=y ++CONFIG_UNIX_DIAG=m ++CONFIG_TLS=m ++CONFIG_XFRM_USER=y ++CONFIG_XFRM_SUB_POLICY=y ++CONFIG_XFRM_STATISTICS=y ++CONFIG_NET_KEY=m ++CONFIG_NET_KEY_MIGRATE=y ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_FIB_TRIE_STATS=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE_DEMUX=m ++CONFIG_NET_IPGRE=m ++CONFIG_NET_IPGRE_BROADCAST=y ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IP_PIMSM_V1=y ++CONFIG_IP_PIMSM_V2=y ++CONFIG_NET_IPVTI=m ++CONFIG_NET_FOU_IP_TUNNELS=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_DIAG=m ++CONFIG_INET_UDP_DIAG=m ++CONFIG_INET_RAW_DIAG=m ++CONFIG_TCP_CONG_ADVANCED=y ++CONFIG_TCP_CONG_HSTCP=m ++CONFIG_TCP_CONG_HYBLA=m ++CONFIG_TCP_CONG_NV=m ++CONFIG_TCP_CONG_SCALABLE=m ++CONFIG_TCP_CONG_LP=m ++CONFIG_TCP_CONG_VENO=m ++CONFIG_TCP_CONG_YEAH=m ++CONFIG_TCP_CONG_ILLINOIS=m ++CONFIG_TCP_CONG_DCTCP=m ++CONFIG_TCP_CONG_CDG=m ++CONFIG_TCP_CONG_BBR=m ++CONFIG_TCP_MD5SIG=y ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_IPV6_ROUTE_INFO=y ++CONFIG_IPV6_OPTIMISTIC_DAD=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_MIP6=y ++CONFIG_IPV6_ILA=m ++CONFIG_IPV6_VTI=m ++CONFIG_IPV6_SIT=m ++CONFIG_IPV6_SIT_6RD=y ++CONFIG_IPV6_GRE=m ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IPV6_PIMSM_V2=y ++CONFIG_IPV6_SEG6_LWTUNNEL=y ++CONFIG_IPV6_SEG6_HMAC=y ++CONFIG_NETLABEL=y ++CONFIG_NETFILTER=y ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_LOG_NETDEV=m ++CONFIG_NF_CONNTRACK_ZONES=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CONNTRACK_TIMEOUT=y ++CONFIG_NF_CONNTRACK_TIMESTAMP=y ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_SNMP=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NF_CT_NETLINK_TIMEOUT=m ++CONFIG_NF_CT_NETLINK_HELPER=m ++CONFIG_NETFILTER_NETLINK_GLUE_CT=y ++CONFIG_NF_TABLES=m ++CONFIG_NF_TABLES_SET=m ++CONFIG_NF_TABLES_INET=y ++CONFIG_NF_TABLES_NETDEV=y ++CONFIG_NFT_NUMGEN=m ++CONFIG_NFT_CT=m ++CONFIG_NFT_FLOW_OFFLOAD=m ++CONFIG_NFT_COUNTER=m ++CONFIG_NFT_CONNLIMIT=m ++CONFIG_NFT_LOG=m ++CONFIG_NFT_LIMIT=m ++CONFIG_NFT_MASQ=m ++CONFIG_NFT_REDIR=m ++CONFIG_NFT_NAT=m ++CONFIG_NFT_TUNNEL=m ++CONFIG_NFT_OBJREF=m ++CONFIG_NFT_QUEUE=m ++CONFIG_NFT_QUOTA=m ++CONFIG_NFT_REJECT=m ++CONFIG_NFT_COMPAT=m ++CONFIG_NFT_HASH=m ++CONFIG_NFT_FIB_INET=m ++CONFIG_NFT_XFRM=m ++CONFIG_NFT_SOCKET=m ++CONFIG_NFT_OSF=m ++CONFIG_NFT_TPROXY=m ++CONFIG_NFT_DUP_NETDEV=m ++CONFIG_NFT_FWD_NETDEV=m ++CONFIG_NFT_FIB_NETDEV=m ++CONFIG_NF_FLOW_TABLE_INET=m ++CONFIG_NF_FLOW_TABLE=m ++CONFIG_NETFILTER_XT_SET=m ++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_CT=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_HMARK=m ++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m ++CONFIG_NETFILTER_XT_TARGET_LED=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_TEE=m ++CONFIG_NETFILTER_XT_TARGET_TPROXY=m ++CONFIG_NETFILTER_XT_TARGET_TRACE=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m ++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m ++CONFIG_NETFILTER_XT_MATCH_BPF=m ++CONFIG_NETFILTER_XT_MATCH_CGROUP=m ++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m ++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_CPU=m ++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_IPCOMP=m ++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m ++CONFIG_NETFILTER_XT_MATCH_IPVS=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_NFACCT=m ++CONFIG_NETFILTER_XT_MATCH_OSF=m ++CONFIG_NETFILTER_XT_MATCH_OWNER=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_RATEEST=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_RECENT=m ++CONFIG_NETFILTER_XT_MATCH_SOCKET=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NETFILTER_XT_MATCH_U32=m ++CONFIG_IP_SET=m ++CONFIG_IP_SET_BITMAP_IP=m ++CONFIG_IP_SET_BITMAP_IPMAC=m ++CONFIG_IP_SET_BITMAP_PORT=m ++CONFIG_IP_SET_HASH_IP=m ++CONFIG_IP_SET_HASH_IPMARK=m ++CONFIG_IP_SET_HASH_IPPORT=m ++CONFIG_IP_SET_HASH_IPPORTIP=m ++CONFIG_IP_SET_HASH_IPPORTNET=m ++CONFIG_IP_SET_HASH_IPMAC=m ++CONFIG_IP_SET_HASH_MAC=m ++CONFIG_IP_SET_HASH_NETPORTNET=m ++CONFIG_IP_SET_HASH_NET=m ++CONFIG_IP_SET_HASH_NETNET=m ++CONFIG_IP_SET_HASH_NETPORT=m ++CONFIG_IP_SET_HASH_NETIFACE=m ++CONFIG_IP_SET_LIST_SET=m ++CONFIG_IP_VS=m ++CONFIG_IP_VS_IPV6=y ++CONFIG_IP_VS_PROTO_TCP=y ++CONFIG_IP_VS_PROTO_UDP=y ++CONFIG_IP_VS_PROTO_ESP=y ++CONFIG_IP_VS_PROTO_AH=y ++CONFIG_IP_VS_PROTO_SCTP=y ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_FO=m ++CONFIG_IP_VS_OVF=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++CONFIG_IP_VS_MH=m ++CONFIG_IP_VS_SED=m ++CONFIG_IP_VS_NQ=m ++CONFIG_IP_VS_FTP=m ++CONFIG_IP_VS_PE_SIP=m ++CONFIG_NFT_DUP_IPV4=m ++CONFIG_NFT_FIB_IPV4=m ++CONFIG_NF_TABLES_ARP=y ++CONFIG_NF_FLOW_TABLE_IPV4=m ++CONFIG_NF_LOG_ARP=m ++CONFIG_NF_REJECT_IPV4=y ++CONFIG_IP_NF_IPTABLES=y ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_RPFILTER=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_TARGET_SYNPROXY=m ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_SECURITY=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++CONFIG_NFT_DUP_IPV6=m ++CONFIG_NFT_FIB_IPV6=m ++CONFIG_NF_FLOW_TABLE_IPV6=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RPFILTER=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_MATCH_SRH=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_TARGET_SYNPROXY=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_IP6_NF_SECURITY=m ++CONFIG_IP6_NF_NAT=m ++CONFIG_IP6_NF_TARGET_MASQUERADE=m ++CONFIG_IP6_NF_TARGET_NPT=m ++CONFIG_NF_TABLES_BRIDGE=m ++CONFIG_NFT_BRIDGE_REJECT=m ++CONFIG_NF_LOG_BRIDGE=m ++CONFIG_BRIDGE_NF_EBTABLES=m ++CONFIG_BRIDGE_EBT_BROUTE=m ++CONFIG_BRIDGE_EBT_T_FILTER=m ++CONFIG_BRIDGE_EBT_T_NAT=m ++CONFIG_BRIDGE_EBT_802_3=m ++CONFIG_BRIDGE_EBT_AMONG=m ++CONFIG_BRIDGE_EBT_ARP=m ++CONFIG_BRIDGE_EBT_IP=m ++CONFIG_BRIDGE_EBT_IP6=m ++CONFIG_BRIDGE_EBT_LIMIT=m ++CONFIG_BRIDGE_EBT_MARK=m ++CONFIG_BRIDGE_EBT_PKTTYPE=m ++CONFIG_BRIDGE_EBT_STP=m ++CONFIG_BRIDGE_EBT_VLAN=m ++CONFIG_BRIDGE_EBT_ARPREPLY=m ++CONFIG_BRIDGE_EBT_DNAT=m ++CONFIG_BRIDGE_EBT_MARK_T=m ++CONFIG_BRIDGE_EBT_REDIRECT=m ++CONFIG_BRIDGE_EBT_SNAT=m ++CONFIG_BRIDGE_EBT_LOG=m ++CONFIG_BRIDGE_EBT_NFLOG=m ++CONFIG_BPFILTER=y ++CONFIG_IP_DCCP=m ++CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y ++CONFIG_SCTP_COOKIE_HMAC_MD5=y ++CONFIG_RDS=m ++CONFIG_RDS_TCP=m ++CONFIG_TIPC=m ++CONFIG_ATM=m ++CONFIG_ATM_CLIP=m ++CONFIG_ATM_LANE=m ++CONFIG_ATM_BR2684=m ++CONFIG_L2TP=m ++CONFIG_L2TP_DEBUGFS=m ++CONFIG_L2TP_V3=y ++CONFIG_L2TP_IP=m ++CONFIG_L2TP_ETH=m ++CONFIG_BRIDGE=m ++CONFIG_BRIDGE_VLAN_FILTERING=y ++CONFIG_NET_DSA=m ++CONFIG_VLAN_8021Q=m ++CONFIG_VLAN_8021Q_GVRP=y ++CONFIG_VLAN_8021Q_MVRP=y ++CONFIG_ATALK=m ++CONFIG_DEV_APPLETALK=m ++CONFIG_IPDDP=m ++CONFIG_IPDDP_ENCAP=y ++CONFIG_6LOWPAN=m ++CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m ++CONFIG_6LOWPAN_GHC_UDP=m ++CONFIG_6LOWPAN_GHC_ICMPV6=m ++CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m ++CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m ++CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m ++CONFIG_IEEE802154=m ++CONFIG_IEEE802154_6LOWPAN=m ++CONFIG_MAC802154=m ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_ATM=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_MULTIQ=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFB=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_CBS=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_DRR=m ++CONFIG_NET_SCH_MQPRIO=m ++CONFIG_NET_SCH_CHOKE=m ++CONFIG_NET_SCH_QFQ=m ++CONFIG_NET_SCH_CODEL=m ++CONFIG_NET_SCH_FQ_CODEL=y ++CONFIG_NET_SCH_FQ=m ++CONFIG_NET_SCH_HHF=m ++CONFIG_NET_SCH_PIE=m ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_SCH_PLUG=m ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_PERF=y ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_CLS_FLOW=m ++CONFIG_NET_CLS_CGROUP=y ++CONFIG_NET_CLS_BPF=m ++CONFIG_NET_CLS_FLOWER=m ++CONFIG_NET_CLS_MATCHALL=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_EMATCH_CANID=m ++CONFIG_NET_EMATCH_IPSET=m ++CONFIG_NET_EMATCH_IPT=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++CONFIG_NET_ACT_SAMPLE=m ++CONFIG_NET_ACT_IPT=m ++CONFIG_NET_ACT_NAT=m ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_ACT_SKBEDIT=m ++CONFIG_NET_ACT_CSUM=m ++CONFIG_NET_ACT_VLAN=m ++CONFIG_NET_ACT_BPF=m ++CONFIG_NET_ACT_CONNMARK=m ++CONFIG_NET_ACT_SKBMOD=m ++CONFIG_NET_ACT_IFE=m ++CONFIG_NET_ACT_TUNNEL_KEY=m ++CONFIG_NET_IFE_SKBMARK=m ++CONFIG_NET_IFE_SKBPRIO=m ++CONFIG_NET_IFE_SKBTCINDEX=m ++CONFIG_DCB=y ++CONFIG_BATMAN_ADV=m ++# CONFIG_BATMAN_ADV_BATMAN_V is not set ++CONFIG_BATMAN_ADV_NC=y ++CONFIG_BATMAN_ADV_DEBUGFS=y ++CONFIG_OPENVSWITCH=m ++CONFIG_VSOCKETS=m ++CONFIG_VIRTIO_VSOCKETS=m ++CONFIG_NETLINK_DIAG=m ++CONFIG_MPLS_ROUTING=m ++CONFIG_CGROUP_NET_PRIO=y ++CONFIG_BPF_JIT=y ++CONFIG_BPF_STREAM_PARSER=y ++CONFIG_NET_PKTGEN=m ++CONFIG_HAMRADIO=y ++CONFIG_AX25=m ++CONFIG_NETROM=m ++CONFIG_ROSE=m ++CONFIG_MKISS=m ++CONFIG_6PACK=m ++CONFIG_BPQETHER=m ++CONFIG_BAYCOM_SER_FDX=m ++CONFIG_BAYCOM_SER_HDX=m ++CONFIG_YAM=m ++CONFIG_CAN=m ++CONFIG_CAN_VCAN=m ++CONFIG_CAN_VXCAN=m ++CONFIG_CAN_SLCAN=m ++CONFIG_CAN_C_CAN=m ++CONFIG_CAN_C_CAN_PLATFORM=m ++CONFIG_CAN_C_CAN_PCI=m ++CONFIG_CAN_CC770=m ++CONFIG_CAN_CC770_PLATFORM=m ++CONFIG_CAN_M_CAN=m ++CONFIG_CAN_SJA1000=m ++CONFIG_CAN_EMS_PCI=m ++CONFIG_CAN_KVASER_PCI=m ++CONFIG_CAN_PEAK_PCI=m ++CONFIG_CAN_PLX_PCI=m ++CONFIG_CAN_SJA1000_PLATFORM=m ++CONFIG_CAN_SOFTING=m ++CONFIG_CAN_8DEV_USB=m ++CONFIG_CAN_EMS_USB=m ++CONFIG_CAN_ESD_USB2=m ++CONFIG_CAN_GS_USB=m ++CONFIG_CAN_KVASER_USB=m ++CONFIG_CAN_PEAK_USB=m ++CONFIG_BT=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_6LOWPAN=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIBTSDIO=m ++CONFIG_BT_HCIUART=m ++CONFIG_BT_HCIUART_BCSP=y ++CONFIG_BT_HCIUART_ATH3K=y ++CONFIG_BT_HCIUART_LL=y ++CONFIG_BT_HCIUART_3WIRE=y ++CONFIG_BT_HCIUART_INTEL=y ++CONFIG_BT_HCIUART_BCM=y ++CONFIG_BT_HCIUART_QCA=y ++CONFIG_BT_HCIUART_MRVL=y ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_CFG80211=m ++CONFIG_CFG80211_CERTIFICATION_ONUS=y ++# CONFIG_CFG80211_REQUIRE_SIGNED_REGDB is not set ++CONFIG_CFG80211_DEBUGFS=y ++CONFIG_MAC80211=m ++CONFIG_MAC80211_MESH=y ++CONFIG_RFKILL=m ++CONFIG_RFKILL_INPUT=y ++CONFIG_RFKILL_GPIO=m ++CONFIG_NET_9P=m ++CONFIG_NET_9P_VIRTIO=m ++CONFIG_NFC=m ++CONFIG_NFC_DIGITAL=m ++CONFIG_NFC_NCI=m ++CONFIG_NFC_HCI=m ++CONFIG_NFC_SHDLC=y ++CONFIG_NFC_SIM=m ++CONFIG_NFC_PORT100=m ++CONFIG_NFC_PN544_I2C=m ++CONFIG_NFC_MICROREAD_I2C=m ++CONFIG_NFC_MRVL_USB=m ++CONFIG_NFC_ST21NFCA_I2C=m ++CONFIG_PCI=y ++CONFIG_PCIEPORTBUS=y ++CONFIG_HOTPLUG_PCI_PCIE=y ++CONFIG_PCIEAER_INJECT=m ++CONFIG_PCIE_ECRC=y ++CONFIG_PCI_STUB=y ++CONFIG_PCI_IOV=y ++CONFIG_PCI_PRI=y ++CONFIG_PCI_PASID=y ++CONFIG_HOTPLUG_PCI=y ++CONFIG_HOTPLUG_PCI_ACPI=y ++CONFIG_PCI_HOST_GENERIC=y ++CONFIG_PCI_XGENE=y ++CONFIG_PCIE_ROCKCHIP_HOST=y ++CONFIG_PCIE_DW_PLAT_HOST=y ++CONFIG_PCI_HISI=y ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DEBUG_DEVRES=y ++CONFIG_SIMPLE_PM_BUS=y ++CONFIG_VEXPRESS_CONFIG=y ++CONFIG_CONNECTOR=y ++CONFIG_MTD=y ++CONFIG_MTD_OF_PARTS=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_CFI=m ++CONFIG_MTD_CFI_INTELEXT=m ++CONFIG_MTD_CFI_AMDSTD=m ++CONFIG_MTD_CFI_STAA=m ++CONFIG_MTD_PHYSMAP=m ++CONFIG_MTD_PHYSMAP_OF=y ++CONFIG_MTD_RAW_NAND=y ++CONFIG_MTD_SPI_NOR=y ++CONFIG_MTD_UBI=m ++CONFIG_BLK_DEV_NULL_BLK=m ++CONFIG_ZRAM=m ++CONFIG_BLK_DEV_UMEM=m ++CONFIG_BLK_DEV_LOOP=m ++CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 ++CONFIG_BLK_DEV_DRBD=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_SKD=m ++CONFIG_BLK_DEV_SX8=m ++CONFIG_BLK_DEV_RAM=m ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_ATA_OVER_ETH=m ++CONFIG_VIRTIO_BLK=m ++CONFIG_BLK_DEV_RBD=m ++CONFIG_BLK_DEV_NVME=m ++CONFIG_NVME_MULTIPATH=y ++CONFIG_TIFM_7XX1=m ++CONFIG_ENCLOSURE_SERVICES=m ++CONFIG_APDS9802ALS=m ++CONFIG_ISL29003=m ++CONFIG_ISL29020=m ++CONFIG_SENSORS_TSL2550=m ++CONFIG_SENSORS_BH1770=m ++CONFIG_SENSORS_APDS990X=m ++CONFIG_SRAM=y ++CONFIG_EEPROM_AT24=m ++CONFIG_EEPROM_LEGACY=m ++CONFIG_EEPROM_MAX6875=m ++CONFIG_SENSORS_LIS3_I2C=m ++CONFIG_ECHO=m ++CONFIG_RAID_ATTRS=m ++CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_ST=m ++CONFIG_BLK_DEV_SR=y ++CONFIG_BLK_DEV_SR_VENDOR=y ++CONFIG_CHR_DEV_SG=y ++CONFIG_CHR_DEV_SCH=m ++CONFIG_SCSI_ENCLOSURE=m ++CONFIG_SCSI_CONSTANTS=y ++CONFIG_SCSI_LOGGING=y ++CONFIG_SCSI_SCAN_ASYNC=y ++CONFIG_SCSI_FC_ATTRS=m ++CONFIG_SCSI_SAS_ATA=y ++CONFIG_SCSI_SRP_ATTRS=m ++CONFIG_ISCSI_TCP=m ++CONFIG_SCSI_BNX2_ISCSI=m ++CONFIG_SCSI_BNX2X_FCOE=m ++CONFIG_BE2ISCSI=m ++CONFIG_SCSI_HPSA=m ++CONFIG_SCSI_MVSAS=m ++# CONFIG_SCSI_MVSAS_DEBUG is not set ++CONFIG_SCSI_MVSAS_TASKLET=y ++CONFIG_SCSI_MVUMI=m ++CONFIG_SCSI_ARCMSR=m ++CONFIG_SCSI_ESAS2R=m ++CONFIG_MEGARAID_NEWGEN=y ++CONFIG_MEGARAID_MM=m ++CONFIG_MEGARAID_MAILBOX=m ++CONFIG_MEGARAID_LEGACY=m ++CONFIG_MEGARAID_SAS=m ++CONFIG_SCSI_UFSHCD=y ++CONFIG_SCSI_UFSHCD_PCI=m ++CONFIG_SCSI_UFSHCD_PLATFORM=y ++CONFIG_SCSI_HPTIOP=m ++CONFIG_LIBFC=m ++CONFIG_LIBFCOE=m ++CONFIG_FCOE=m ++CONFIG_SCSI_SNIC=m ++CONFIG_SCSI_DMX3191D=m ++CONFIG_SCSI_INITIO=m ++CONFIG_SCSI_INIA100=m ++CONFIG_SCSI_STEX=m ++CONFIG_SCSI_SYM53C8XX_2=m ++CONFIG_SCSI_IPR=m ++CONFIG_SCSI_QLOGIC_1280=m ++CONFIG_SCSI_QLA_FC=m ++CONFIG_TCM_QLA2XXX=m ++CONFIG_SCSI_QLA_ISCSI=m ++CONFIG_SCSI_DC395x=m ++CONFIG_SCSI_AM53C974=m ++CONFIG_SCSI_WD719X=m ++CONFIG_SCSI_DEBUG=m ++CONFIG_SCSI_PMCRAID=m ++CONFIG_SCSI_VIRTIO=y ++CONFIG_SCSI_CHELSIO_FCOE=m ++CONFIG_SCSI_DH=y ++CONFIG_SCSI_DH_RDAC=m ++CONFIG_SCSI_DH_HP_SW=m ++CONFIG_SCSI_DH_EMC=m ++CONFIG_SCSI_DH_ALUA=m ++CONFIG_ATA=y ++CONFIG_SATA_AHCI=y ++CONFIG_SATA_AHCI_PLATFORM=y ++CONFIG_AHCI_XGENE=y ++CONFIG_SATA_INIC162X=m ++CONFIG_SATA_ACARD_AHCI=m ++CONFIG_SATA_SIL24=y ++CONFIG_PDC_ADMA=m ++CONFIG_SATA_QSTOR=m ++CONFIG_SATA_SX4=m ++CONFIG_ATA_PIIX=y ++CONFIG_SATA_MV=m ++CONFIG_SATA_NV=m ++CONFIG_SATA_PROMISE=m ++CONFIG_SATA_SIL=m ++CONFIG_SATA_SIS=m ++CONFIG_SATA_SVW=m ++CONFIG_SATA_ULI=m ++CONFIG_SATA_VIA=m ++CONFIG_SATA_VITESSE=m ++CONFIG_PATA_ALI=m ++CONFIG_PATA_AMD=m ++CONFIG_PATA_ARTOP=m ++CONFIG_PATA_ATIIXP=m ++CONFIG_PATA_ATP867X=m ++CONFIG_PATA_CMD64X=m ++CONFIG_PATA_CYPRESS=m ++CONFIG_PATA_EFAR=m ++CONFIG_PATA_HPT366=m ++CONFIG_PATA_HPT37X=m ++CONFIG_PATA_HPT3X2N=m ++CONFIG_PATA_HPT3X3=m ++CONFIG_PATA_IT8213=m ++CONFIG_PATA_IT821X=m ++CONFIG_PATA_JMICRON=m ++CONFIG_PATA_MARVELL=m ++CONFIG_PATA_NETCELL=m ++CONFIG_PATA_NINJA32=m ++CONFIG_PATA_NS87415=m ++CONFIG_PATA_OLDPIIX=m ++CONFIG_PATA_OPTIDMA=m ++CONFIG_PATA_PDC2027X=m ++CONFIG_PATA_PDC_OLD=m ++CONFIG_PATA_RDC=m ++CONFIG_PATA_SCH=m ++CONFIG_PATA_SERVERWORKS=m ++CONFIG_PATA_SIL680=m ++CONFIG_PATA_TOSHIBA=m ++CONFIG_PATA_TRIFLEX=m ++CONFIG_PATA_VIA=m ++CONFIG_PATA_WINBOND=m ++CONFIG_PATA_CMD640_PCI=m ++CONFIG_PATA_MPIIX=m ++CONFIG_PATA_NS87410=m ++CONFIG_PATA_OPTI=m ++CONFIG_PATA_PLATFORM=y ++CONFIG_PATA_OF_PLATFORM=y ++CONFIG_ATA_GENERIC=m ++CONFIG_MD=y ++CONFIG_BLK_DEV_MD=y ++CONFIG_MD_LINEAR=m ++CONFIG_MD_MULTIPATH=m ++CONFIG_MD_FAULTY=m ++CONFIG_MD_CLUSTER=m ++CONFIG_BCACHE=m ++CONFIG_BLK_DEV_DM=y ++CONFIG_DM_DEBUG=y ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=y ++CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_CACHE=m ++CONFIG_DM_WRITECACHE=m ++CONFIG_DM_MIRROR=y ++CONFIG_DM_LOG_USERSPACE=m ++CONFIG_DM_RAID=m ++CONFIG_DM_ZERO=y ++CONFIG_DM_MULTIPATH=m ++CONFIG_DM_MULTIPATH_QL=m ++CONFIG_DM_MULTIPATH_ST=m ++CONFIG_DM_DELAY=m ++CONFIG_DM_DUST=m ++CONFIG_DM_INIT=y ++CONFIG_DM_UEVENT=y ++CONFIG_DM_FLAKEY=m ++CONFIG_DM_VERITY=m ++CONFIG_DM_VERITY_FEC=y ++CONFIG_DM_SWITCH=m ++CONFIG_DM_LOG_WRITES=m ++CONFIG_DM_INTEGRITY=m ++CONFIG_DM_ZONED=m ++CONFIG_TARGET_CORE=m ++CONFIG_TCM_IBLOCK=m ++CONFIG_TCM_FILEIO=m ++CONFIG_TCM_PSCSI=m ++CONFIG_TCM_USER2=m ++CONFIG_LOOPBACK_TARGET=m ++CONFIG_TCM_FC=m ++CONFIG_ISCSI_TARGET=m ++CONFIG_FIREWIRE_NOSY=m ++CONFIG_BONDING=m ++CONFIG_DUMMY=m ++CONFIG_EQUALIZER=m ++CONFIG_NET_FC=y ++CONFIG_IFB=m ++CONFIG_NET_TEAM=m ++CONFIG_NET_TEAM_MODE_BROADCAST=m ++CONFIG_NET_TEAM_MODE_ROUNDROBIN=m ++CONFIG_NET_TEAM_MODE_RANDOM=m ++CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m ++CONFIG_NET_TEAM_MODE_LOADBALANCE=m ++CONFIG_MACVLAN=m ++CONFIG_MACVTAP=m ++CONFIG_IPVLAN=m ++CONFIG_IPVTAP=m ++CONFIG_VXLAN=m ++CONFIG_GENEVE=m ++CONFIG_NETCONSOLE=m ++CONFIG_NETCONSOLE_DYNAMIC=y ++CONFIG_TUN=m ++CONFIG_VETH=m ++CONFIG_VIRTIO_NET=m ++CONFIG_NLMON=m ++CONFIG_NET_VRF=m ++# CONFIG_ATM_DRIVERS is not set ++CONFIG_NET_DSA_BCM_SF2=m ++CONFIG_NET_DSA_MV88E6060=m ++CONFIG_NET_DSA_MV88E6XXX=m ++CONFIG_NET_DSA_MV88E6XXX_PTP=y ++CONFIG_NET_DSA_QCA8K=m ++# CONFIG_NET_VENDOR_3COM is not set ++# CONFIG_NET_VENDOR_ADAPTEC is not set ++CONFIG_ET131X=m ++CONFIG_ACENIC=m ++CONFIG_ALTERA_TSE=m ++CONFIG_AMD8111_ETH=m ++CONFIG_PCNET32=m ++CONFIG_AMD_XGBE=m ++CONFIG_AQTION=m ++CONFIG_ATL2=m ++CONFIG_ATL1=m ++CONFIG_ATL1E=m ++CONFIG_ATL1C=m ++CONFIG_ALX=m ++# CONFIG_NET_VENDOR_AURORA is not set ++CONFIG_B44=m ++CONFIG_BCMGENET=m ++CONFIG_TIGON3=m ++CONFIG_BNX2X=m ++# CONFIG_NET_VENDOR_BROCADE is not set ++CONFIG_MACB=m ++# CONFIG_NET_VENDOR_CAVIUM is not set ++# CONFIG_NET_VENDOR_CHELSIO is not set ++# CONFIG_NET_VENDOR_CISCO is not set ++CONFIG_DNET=m ++# CONFIG_NET_VENDOR_DEC is not set ++CONFIG_DL2K=m ++CONFIG_SUNDANCE=m ++# CONFIG_NET_VENDOR_EMULEX is not set ++# CONFIG_NET_VENDOR_EZCHIP is not set ++CONFIG_HIX5HD2_GMAC=m ++CONFIG_HIP04_ETH=m ++CONFIG_HNS_DSAF=m ++CONFIG_HNS_ENET=m ++# CONFIG_NET_VENDOR_HP is not set ++# CONFIG_NET_VENDOR_I825XX is not set ++CONFIG_E100=m ++CONFIG_E1000=m ++CONFIG_E1000E=m ++CONFIG_IGB=m ++CONFIG_IGBVF=m ++CONFIG_IXGB=m ++CONFIG_IXGBE=m ++CONFIG_IXGBE_DCB=y ++CONFIG_IXGBEVF=m ++CONFIG_I40E=m ++CONFIG_I40EVF=m ++CONFIG_FM10K=m ++CONFIG_JME=m ++CONFIG_MVMDIO=m ++CONFIG_SKGE=m ++CONFIG_SKGE_GENESIS=y ++CONFIG_SKY2=m ++CONFIG_MLX4_EN=m ++CONFIG_KSZ884X_PCI=m ++CONFIG_MYRI10GE=m ++CONFIG_FEALNX=m ++CONFIG_NATSEMI=m ++CONFIG_NS83820=m ++CONFIG_NE2K_PCI=m ++CONFIG_FORCEDETH=m ++CONFIG_ETHOC=m ++CONFIG_HAMACHI=m ++CONFIG_YELLOWFIN=m ++# CONFIG_NET_VENDOR_QLOGIC is not set ++# CONFIG_NET_VENDOR_QUALCOMM is not set ++CONFIG_R6040=m ++CONFIG_8139CP=m ++CONFIG_8139TOO=m ++# CONFIG_8139TOO_PIO is not set ++CONFIG_8139TOO_8129=y ++CONFIG_R8169=m ++# CONFIG_NET_VENDOR_RENESAS is not set ++CONFIG_ROCKER=m ++# CONFIG_NET_VENDOR_SAMSUNG is not set ++# CONFIG_NET_VENDOR_SEEQ is not set ++CONFIG_SC92031=m ++CONFIG_SIS900=m ++CONFIG_SIS190=m ++CONFIG_SMC91X=m ++CONFIG_EPIC100=m ++CONFIG_SMSC911X=m ++CONFIG_SMSC9420=m ++CONFIG_STMMAC_ETH=m ++CONFIG_DWMAC_DWC_QOS_ETH=m ++# CONFIG_NET_VENDOR_SUN is not set ++CONFIG_TEHUTI=m ++CONFIG_VIA_RHINE=m ++CONFIG_VIA_RHINE_MMIO=y ++CONFIG_VIA_VELOCITY=m ++# CONFIG_NET_VENDOR_WIZNET is not set ++CONFIG_NET_SB1000=y ++CONFIG_MDIO_BITBANG=m ++CONFIG_MDIO_BUS_MUX_GPIO=m ++CONFIG_MDIO_BUS_MUX_MMIOREG=m ++CONFIG_PHYLIB=y ++CONFIG_LED_TRIGGER_PHY=y ++CONFIG_SFP=m ++CONFIG_AMD_PHY=m ++CONFIG_AT803X_PHY=m ++CONFIG_BCM87XX_PHY=m ++CONFIG_BROADCOM_PHY=m ++CONFIG_CICADA_PHY=m ++CONFIG_DAVICOM_PHY=m ++CONFIG_DP83848_PHY=m ++CONFIG_DP83867_PHY=m ++CONFIG_ICPLUS_PHY=m ++CONFIG_LSI_ET1011C_PHY=m ++CONFIG_LXT_PHY=m ++CONFIG_MARVELL_10G_PHY=m ++CONFIG_MICREL_PHY=m ++CONFIG_NATIONAL_PHY=m ++CONFIG_QSEMI_PHY=m ++CONFIG_ROCKCHIP_PHY=y ++CONFIG_STE10XP=m ++CONFIG_VITESSE_PHY=m ++CONFIG_PPP=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MPPE=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOATM=m ++CONFIG_PPPOE=m ++CONFIG_PPTP=m ++CONFIG_PPPOL2TP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLIP_SMART=y ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_RTL8152=m ++CONFIG_USB_LAN78XX=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_HUAWEI_CDC_NCM=m ++CONFIG_USB_NET_CDC_MBIM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SR9700=m ++CONFIG_USB_NET_SR9800=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=m ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_QMI_WWAN=m ++CONFIG_USB_HSO=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_USB_NET_CH9200=m ++CONFIG_ADM8211=m ++CONFIG_ATH5K=m ++CONFIG_ATH5K_DEBUG=y ++CONFIG_ATH9K=m ++CONFIG_ATH9K_AHB=y ++CONFIG_ATH9K_DEBUGFS=y ++CONFIG_ATH9K_HTC=m ++CONFIG_ATH9K_HWRNG=y ++CONFIG_ATH9K_COMMON_SPECTRAL=y ++CONFIG_CARL9170=m ++CONFIG_ATH6KL=m ++CONFIG_ATH6KL_SDIO=m ++CONFIG_ATH6KL_USB=m ++CONFIG_ATH6KL_DEBUG=y ++CONFIG_AR5523=m ++CONFIG_WIL6210=m ++CONFIG_ATH10K=m ++CONFIG_ATH10K_PCI=m ++CONFIG_ATH10K_DEBUGFS=y ++CONFIG_WCN36XX=m ++CONFIG_ATMEL=m ++CONFIG_PCI_ATMEL=m ++CONFIG_AT76C50X_USB=m ++CONFIG_B43=m ++CONFIG_B43_SDIO=y ++CONFIG_B43_DEBUG=y ++CONFIG_B43LEGACY=m ++CONFIG_BRCMSMAC=m ++CONFIG_BRCMFMAC=m ++CONFIG_BRCMFMAC_USB=y ++CONFIG_BRCMFMAC_PCIE=y ++CONFIG_BRCM_TRACING=y ++CONFIG_BRCMDBG=y ++CONFIG_IPW2100=m ++CONFIG_IPW2100_MONITOR=y ++CONFIG_IPW2200=m ++CONFIG_IPW2200_MONITOR=y ++CONFIG_IPW2200_PROMISCUOUS=y ++CONFIG_IPW2200_QOS=y ++CONFIG_IWL4965=m ++CONFIG_IWL3945=m ++CONFIG_IWLEGACY_DEBUG=y ++CONFIG_IWLEGACY_DEBUGFS=y ++CONFIG_IWLWIFI=m ++CONFIG_IWLDVM=m ++CONFIG_IWLMVM=m ++CONFIG_IWLWIFI_DEBUG=y ++CONFIG_IWLWIFI_DEBUGFS=y ++CONFIG_HOSTAP=m ++CONFIG_HOSTAP_FIRMWARE=y ++CONFIG_HOSTAP_PLX=m ++CONFIG_HOSTAP_PCI=m ++CONFIG_HERMES=m ++CONFIG_HERMES_PRISM=y ++CONFIG_PLX_HERMES=m ++CONFIG_TMD_HERMES=m ++CONFIG_NORTEL_HERMES=m ++CONFIG_PCI_HERMES=m ++CONFIG_ORINOCO_USB=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_P54_PCI=m ++CONFIG_PRISM54=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_LIBERTAS_MESH=y ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_MWIFIEX_PCIE=m ++CONFIG_MWIFIEX_USB=m ++CONFIG_MWL8K=m ++CONFIG_MT7601U=m ++CONFIG_RT2X00=m ++CONFIG_RT2400PCI=m ++CONFIG_RT2500PCI=m ++CONFIG_RT61PCI=m ++CONFIG_RT2800PCI=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT3573=y ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RT2800USB_RT55XX=y ++CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RT2X00_LIB_DEBUGFS=y ++CONFIG_RTL8180=m ++CONFIG_RTL8187=m ++CONFIG_RTL8192CE=m ++CONFIG_RTL8192SE=m ++CONFIG_RTL8192DE=m ++CONFIG_RTL8723AE=m ++CONFIG_RTL8723BE=m ++CONFIG_RTL8188EE=m ++CONFIG_RTL8192EE=m ++CONFIG_RTL8821AE=m ++CONFIG_RTL8192CU=m ++CONFIG_RTL8XXXU=m ++CONFIG_RSI_91X=m ++CONFIG_CW1200=m ++CONFIG_CW1200_WLAN_SDIO=m ++CONFIG_WL1251=m ++CONFIG_WL1251_SPI=m ++CONFIG_WL1251_SDIO=m ++CONFIG_WL12XX=m ++CONFIG_WL18XX=m ++CONFIG_WLCORE_SPI=m ++CONFIG_WLCORE_SDIO=m ++CONFIG_USB_ZD1201=m ++CONFIG_ZD1211RW=m ++CONFIG_QTNFMAC_PCIE=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_IEEE802154_FAKELB=m ++CONFIG_IEEE802154_ATUSB=m ++CONFIG_INPUT_SPARSEKMAP=m ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=y ++CONFIG_KEYBOARD_ADC=m ++CONFIG_KEYBOARD_GPIO=m ++CONFIG_KEYBOARD_GPIO_POLLED=m ++CONFIG_KEYBOARD_CROS_EC=y ++CONFIG_MOUSE_PS2_ELANTECH=y ++CONFIG_MOUSE_PS2_SENTELIC=y ++CONFIG_MOUSE_SERIAL=m ++CONFIG_MOUSE_APPLETOUCH=m ++CONFIG_MOUSE_BCM5974=m ++CONFIG_MOUSE_CYAPA=m ++CONFIG_MOUSE_ELAN_I2C=y ++CONFIG_MOUSE_ELAN_I2C_SMBUS=y ++CONFIG_MOUSE_VSXXXAA=m ++CONFIG_MOUSE_SYNAPTICS_I2C=m ++CONFIG_MOUSE_SYNAPTICS_USB=m ++CONFIG_INPUT_JOYSTICK=y ++CONFIG_JOYSTICK_IFORCE=m ++CONFIG_JOYSTICK_IFORCE_USB=m ++CONFIG_JOYSTICK_IFORCE_232=m ++CONFIG_JOYSTICK_WARRIOR=m ++CONFIG_JOYSTICK_MAGELLAN=m ++CONFIG_JOYSTICK_SPACEORB=m ++CONFIG_JOYSTICK_SPACEBALL=m ++CONFIG_JOYSTICK_STINGER=m ++CONFIG_JOYSTICK_TWIDJOY=m ++CONFIG_JOYSTICK_ZHENHUA=m ++CONFIG_JOYSTICK_XPAD=m ++CONFIG_JOYSTICK_XPAD_FF=y ++CONFIG_JOYSTICK_XPAD_LEDS=y ++CONFIG_INPUT_TABLET=y ++CONFIG_TABLET_USB_ACECAD=m ++CONFIG_TABLET_USB_AIPTEK=m ++CONFIG_TABLET_USB_GTCO=m ++CONFIG_TABLET_USB_HANWANG=m ++CONFIG_TABLET_USB_KBTAB=m ++CONFIG_TABLET_USB_PEGASUS=m ++CONFIG_TABLET_SERIAL_WACOM4=m ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ATMEL_MXT=y ++CONFIG_TOUCHSCREEN_AUO_PIXCIR=m ++CONFIG_TOUCHSCREEN_DYNAPRO=m ++CONFIG_TOUCHSCREEN_EETI=m ++CONFIG_TOUCHSCREEN_EGALAX=m ++CONFIG_TOUCHSCREEN_FUJITSU=m ++CONFIG_TOUCHSCREEN_ILI210X=m ++CONFIG_TOUCHSCREEN_GUNZE=m ++CONFIG_TOUCHSCREEN_ELAN=m ++CONFIG_TOUCHSCREEN_ELO=m ++CONFIG_TOUCHSCREEN_WACOM_W8001=m ++CONFIG_TOUCHSCREEN_WACOM_I2C=m ++CONFIG_TOUCHSCREEN_MCS5000=m ++CONFIG_TOUCHSCREEN_MMS114=m ++CONFIG_TOUCHSCREEN_MTOUCH=m ++CONFIG_TOUCHSCREEN_INEXIO=m ++CONFIG_TOUCHSCREEN_MK712=m ++CONFIG_TOUCHSCREEN_PENMOUNT=m ++CONFIG_TOUCHSCREEN_EDT_FT5X06=m ++CONFIG_TOUCHSCREEN_TOUCHRIGHT=m ++CONFIG_TOUCHSCREEN_TOUCHWIN=m ++CONFIG_TOUCHSCREEN_PIXCIR=m ++CONFIG_TOUCHSCREEN_USB_COMPOSITE=m ++CONFIG_TOUCHSCREEN_TOUCHIT213=m ++CONFIG_TOUCHSCREEN_TSC_SERIO=m ++CONFIG_TOUCHSCREEN_TSC2007=m ++CONFIG_TOUCHSCREEN_ST1232=m ++CONFIG_TOUCHSCREEN_ZFORCE=m ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_E3X0_BUTTON=m ++CONFIG_INPUT_MMA8450=m ++CONFIG_INPUT_GP2A=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_KXTJ9=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_AXP20X_PEK=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_PWM_BEEPER=m ++CONFIG_INPUT_RK805_PWRKEY=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_INPUT_CMA3000_I2C=m ++CONFIG_SERIO_AMBAKMI=y ++CONFIG_SERIO_RAW=m ++CONFIG_SERIO_ALTERA_PS2=m ++CONFIG_SERIO_ARC_PS2=m ++# CONFIG_LEGACY_PTYS is not set ++CONFIG_SERIAL_NONSTANDARD=y ++CONFIG_ROCKETPORT=m ++CONFIG_CYCLADES=m ++CONFIG_SYNCLINKMP=m ++CONFIG_SYNCLINK_GT=m ++CONFIG_NOZOMI=m ++CONFIG_N_HDLC=m ++CONFIG_N_GSM=m ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_NR_UARTS=32 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++CONFIG_SERIAL_8250_DW=y ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y ++CONFIG_SERIAL_JSM=m ++CONFIG_SERIAL_ARC=m ++CONFIG_SERIAL_FSL_LPUART=y ++CONFIG_SERIAL_FSL_LPUART_CONSOLE=y ++CONFIG_SERIAL_DEV_BUS=y ++CONFIG_VIRTIO_CONSOLE=y ++CONFIG_IPMI_HANDLER=y ++CONFIG_IPMI_DEVICE_INTERFACE=m ++CONFIG_IPMI_SSIF=m ++CONFIG_IPMI_WATCHDOG=m ++CONFIG_IPMI_POWEROFF=m ++CONFIG_HW_RANDOM=y ++CONFIG_HW_RANDOM_TIMERIOMEM=m ++CONFIG_HW_RANDOM_VIRTIO=m ++CONFIG_RAW_DRIVER=y ++CONFIG_MAX_RAW_DEVS=8192 ++CONFIG_TCG_TPM=y ++CONFIG_TCG_TIS_I2C_INFINEON=y ++CONFIG_TCG_ATMEL=m ++CONFIG_I2C_CHARDEV=m ++CONFIG_I2C_ARB_GPIO_CHALLENGE=m ++CONFIG_I2C_MUX_GPIO=m ++CONFIG_I2C_MUX_GPMUX=m ++CONFIG_I2C_MUX_PCA9541=m ++CONFIG_I2C_MUX_PCA954x=y ++CONFIG_I2C_MUX_PINCTRL=m ++CONFIG_I2C_MUX_REG=m ++CONFIG_I2C_DEMUX_PINCTRL=m ++CONFIG_I2C_NFORCE2=m ++CONFIG_I2C_SCMI=y ++CONFIG_I2C_DESIGNWARE_PLATFORM=y ++CONFIG_I2C_DESIGNWARE_PCI=m ++CONFIG_I2C_GPIO=m ++CONFIG_I2C_PCA_PLATFORM=m ++CONFIG_I2C_RK3X=y ++CONFIG_I2C_SIMTEC=m ++CONFIG_I2C_DIOLAN_U2C=m ++CONFIG_I2C_PARPORT_LIGHT=m ++CONFIG_I2C_TINY_USB=m ++CONFIG_I2C_VIPERBOARD=m ++CONFIG_I2C_CROS_EC_TUNNEL=y ++CONFIG_I2C_STUB=m ++CONFIG_I2C_SLAVE=y ++CONFIG_I2C_SLAVE_EEPROM=m ++CONFIG_SPI=y ++CONFIG_SPI_NXP_FLEXSPI=y ++CONFIG_SPI_GPIO=y ++CONFIG_SPI_PL022=y ++CONFIG_SPI_ROCKCHIP=y ++CONFIG_SPI_SPIDEV=m ++CONFIG_SPMI=y ++CONFIG_PPS_CLIENT_LDISC=m ++CONFIG_PPS_CLIENT_GPIO=m ++CONFIG_DP83640_PHY=m ++CONFIG_PINCTRL_AMD=y ++CONFIG_PINCTRL_SINGLE=y ++CONFIG_PINCTRL_MAX77620=y ++CONFIG_PINCTRL_RK805=y ++CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_DWAPB=y ++CONFIG_GPIO_PL061=y ++CONFIG_GPIO_SYSCON=y ++CONFIG_GPIO_XGENE=y ++CONFIG_GPIO_PCA953X=y ++CONFIG_GPIO_PCA953X_IRQ=y ++CONFIG_GPIO_MAX77620=y ++CONFIG_GPIO_VIPERBOARD=m ++CONFIG_W1=m ++CONFIG_W1_MASTER_DS2490=m ++CONFIG_W1_MASTER_DS2482=m ++CONFIG_W1_MASTER_DS1WM=m ++CONFIG_W1_SLAVE_THERM=m ++CONFIG_W1_SLAVE_SMEM=m ++CONFIG_W1_SLAVE_DS2408=m ++# CONFIG_W1_SLAVE_DS2408_READBACK is not set ++CONFIG_W1_SLAVE_DS2413=m ++CONFIG_W1_SLAVE_DS2406=m ++CONFIG_W1_SLAVE_DS2423=m ++CONFIG_W1_SLAVE_DS2431=m ++CONFIG_W1_SLAVE_DS2433=m ++CONFIG_W1_SLAVE_DS2433_CRC=y ++CONFIG_W1_SLAVE_DS2780=m ++CONFIG_W1_SLAVE_DS2781=m ++CONFIG_W1_SLAVE_DS28E04=m ++CONFIG_POWER_AVS=y ++CONFIG_ROCKCHIP_IODOMAIN=y ++CONFIG_POWER_RESET_GPIO=y ++CONFIG_POWER_RESET_GPIO_RESTART=y ++CONFIG_POWER_RESET_RESTART=y ++CONFIG_POWER_RESET_VEXPRESS=y ++CONFIG_POWER_RESET_XGENE=y ++CONFIG_POWER_RESET_SYSCON=y ++CONFIG_POWER_RESET_SYSCON_POWEROFF=y ++CONFIG_SYSCON_REBOOT_MODE=y ++CONFIG_BATTERY_CW2015=m ++CONFIG_BATTERY_SBS=m ++CONFIG_CHARGER_SBS=m ++CONFIG_MANAGER_SBS=m ++CONFIG_CHARGER_AXP20X=m ++CONFIG_CHARGER_GPIO=y ++CONFIG_CHARGER_SMB347=m ++CONFIG_CHARGER_CROS_USBPD=m ++CONFIG_SENSORS_AD7414=m ++CONFIG_SENSORS_AD7418=m ++CONFIG_SENSORS_ADM1021=m ++CONFIG_SENSORS_ADM1025=m ++CONFIG_SENSORS_ADM1026=m ++CONFIG_SENSORS_ADM1029=m ++CONFIG_SENSORS_ADM1031=m ++CONFIG_SENSORS_ADM9240=m ++CONFIG_SENSORS_ADT7410=m ++CONFIG_SENSORS_ADT7411=m ++CONFIG_SENSORS_ADT7462=m ++CONFIG_SENSORS_ADT7470=m ++CONFIG_SENSORS_ADT7475=m ++CONFIG_SENSORS_ASC7621=m ++CONFIG_SENSORS_ARM_SCPI=y ++CONFIG_SENSORS_ATXP1=m ++CONFIG_SENSORS_DS620=m ++CONFIG_SENSORS_DS1621=m ++CONFIG_SENSORS_F71805F=m ++CONFIG_SENSORS_F71882FG=m ++CONFIG_SENSORS_F75375S=m ++CONFIG_SENSORS_GL518SM=m ++CONFIG_SENSORS_GL520SM=m ++CONFIG_SENSORS_G760A=m ++CONFIG_SENSORS_G762=m ++CONFIG_SENSORS_GPIO_FAN=m ++CONFIG_SENSORS_IBMAEM=m ++CONFIG_SENSORS_IBMPEX=m ++CONFIG_SENSORS_IIO_HWMON=m ++CONFIG_SENSORS_IT87=m ++CONFIG_SENSORS_POWR1220=m ++CONFIG_SENSORS_LINEAGE=m ++CONFIG_SENSORS_LTC2945=m ++CONFIG_SENSORS_LTC4151=m ++CONFIG_SENSORS_LTC4215=m ++CONFIG_SENSORS_LTC4222=m ++CONFIG_SENSORS_LTC4245=m ++CONFIG_SENSORS_LTC4260=m ++CONFIG_SENSORS_LTC4261=m ++CONFIG_SENSORS_MAX16065=m ++CONFIG_SENSORS_MAX1619=m ++CONFIG_SENSORS_MAX1668=m ++CONFIG_SENSORS_MAX197=m ++CONFIG_SENSORS_MAX6639=m ++CONFIG_SENSORS_MAX6642=m ++CONFIG_SENSORS_MAX6650=m ++CONFIG_SENSORS_MAX6697=m ++CONFIG_SENSORS_MCP3021=m ++CONFIG_SENSORS_LM63=m ++CONFIG_SENSORS_LM73=m ++CONFIG_SENSORS_LM75=m ++CONFIG_SENSORS_LM77=m ++CONFIG_SENSORS_LM78=m ++CONFIG_SENSORS_LM80=m ++CONFIG_SENSORS_LM83=m ++CONFIG_SENSORS_LM85=m ++CONFIG_SENSORS_LM87=m ++CONFIG_SENSORS_LM90=m ++CONFIG_SENSORS_LM92=m ++CONFIG_SENSORS_LM93=m ++CONFIG_SENSORS_LM95234=m ++CONFIG_SENSORS_LM95241=m ++CONFIG_SENSORS_LM95245=m ++CONFIG_SENSORS_PC87360=m ++CONFIG_SENSORS_PC87427=m ++CONFIG_SENSORS_NTC_THERMISTOR=m ++CONFIG_SENSORS_NCT6683=m ++CONFIG_SENSORS_NCT6775=m ++CONFIG_SENSORS_NCT7802=m ++CONFIG_SENSORS_NCT7904=m ++CONFIG_SENSORS_PCF8591=m ++CONFIG_PMBUS=m ++CONFIG_SENSORS_ADM1275=m ++CONFIG_SENSORS_LM25066=m ++CONFIG_SENSORS_LTC2978=m ++CONFIG_SENSORS_MAX16064=m ++CONFIG_SENSORS_MAX34440=m ++CONFIG_SENSORS_MAX8688=m ++CONFIG_SENSORS_TPS40422=m ++CONFIG_SENSORS_UCD9000=m ++CONFIG_SENSORS_UCD9200=m ++CONFIG_SENSORS_ZL6100=m ++CONFIG_SENSORS_PWM_FAN=m ++CONFIG_SENSORS_SHT15=m ++CONFIG_SENSORS_SHT21=m ++CONFIG_SENSORS_SHT3x=m ++CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_SIS5595=m ++CONFIG_SENSORS_DME1737=m ++CONFIG_SENSORS_EMC1403=m ++CONFIG_SENSORS_EMC6W201=m ++CONFIG_SENSORS_SMSC47M1=m ++CONFIG_SENSORS_SMSC47M192=m ++CONFIG_SENSORS_SMSC47B397=m ++CONFIG_SENSORS_SCH5627=m ++CONFIG_SENSORS_SCH5636=m ++CONFIG_SENSORS_ADC128D818=m ++CONFIG_SENSORS_ADS7828=m ++CONFIG_SENSORS_AMC6821=m ++CONFIG_SENSORS_INA209=m ++CONFIG_SENSORS_INA2XX=m ++CONFIG_SENSORS_INA3221=m ++CONFIG_SENSORS_TC74=m ++CONFIG_SENSORS_THMC50=m ++CONFIG_SENSORS_TMP102=m ++CONFIG_SENSORS_TMP103=m ++CONFIG_SENSORS_TMP108=m ++CONFIG_SENSORS_TMP401=m ++CONFIG_SENSORS_TMP421=m ++CONFIG_SENSORS_VEXPRESS=m ++CONFIG_SENSORS_VIA686A=m ++CONFIG_SENSORS_VT1211=m ++CONFIG_SENSORS_VT8231=m ++CONFIG_SENSORS_W83781D=m ++CONFIG_SENSORS_W83791D=m ++CONFIG_SENSORS_W83792D=m ++CONFIG_SENSORS_W83793=m ++CONFIG_SENSORS_W83795=m ++CONFIG_SENSORS_W83L785TS=m ++CONFIG_SENSORS_W83L786NG=m ++CONFIG_SENSORS_W83627HF=m ++CONFIG_SENSORS_W83627EHF=m ++CONFIG_SENSORS_ACPI_POWER=m ++CONFIG_THERMAL_WRITABLE_TRIPS=y ++CONFIG_THERMAL_GOV_FAIR_SHARE=y ++CONFIG_THERMAL_GOV_BANG_BANG=y ++CONFIG_THERMAL_GOV_USER_SPACE=y ++CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y ++CONFIG_CPU_THERMAL=y ++CONFIG_CLOCK_THERMAL=y ++CONFIG_DEVFREQ_THERMAL=y ++CONFIG_THERMAL_EMULATION=y ++CONFIG_MAX77620_THERMAL=m ++CONFIG_ROCKCHIP_THERMAL=m ++CONFIG_GENERIC_ADC_THERMAL=m ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_CORE=y ++CONFIG_SOFT_WATCHDOG=m ++CONFIG_GPIO_WATCHDOG=m ++CONFIG_ARM_SP805_WATCHDOG=m ++CONFIG_ARM_SBSA_WATCHDOG=m ++CONFIG_DW_WATCHDOG=m ++CONFIG_MAX77620_WATCHDOG=m ++CONFIG_ALIM7101_WDT=m ++CONFIG_I6300ESB_WDT=m ++CONFIG_PCIPCWATCHDOG=m ++CONFIG_WDTPCI=m ++CONFIG_USBPCWATCHDOG=m ++CONFIG_SSB_DRIVER_GPIO=y ++CONFIG_BCMA_DRIVER_GMAC_CMN=y ++CONFIG_BCMA_DRIVER_GPIO=y ++CONFIG_MFD_AXP20X_I2C=y ++CONFIG_MFD_MAX77620=y ++CONFIG_MFD_VIPERBOARD=m ++CONFIG_MFD_RK808=y ++CONFIG_MFD_SEC_CORE=y ++CONFIG_MFD_SM501=m ++CONFIG_MFD_SM501_GPIO=y ++CONFIG_MFD_VX855=m ++CONFIG_REGULATOR_FIXED_VOLTAGE=y ++CONFIG_REGULATOR_AXP20X=y ++CONFIG_REGULATOR_FAN53555=y ++CONFIG_REGULATOR_GPIO=y ++CONFIG_REGULATOR_MAX77620=y ++CONFIG_REGULATOR_PFUZE100=y ++CONFIG_REGULATOR_PWM=y ++CONFIG_REGULATOR_QCOM_SPMI=y ++CONFIG_REGULATOR_RK808=y ++CONFIG_REGULATOR_S2MPS11=y ++CONFIG_REGULATOR_VCTRL=y ++CONFIG_REGULATOR_VEXPRESS=y ++CONFIG_LIRC=y ++CONFIG_RC_DECODERS=y ++CONFIG_IR_NEC_DECODER=m ++CONFIG_IR_RC5_DECODER=m ++CONFIG_IR_RC6_DECODER=m ++CONFIG_IR_JVC_DECODER=m ++CONFIG_IR_SONY_DECODER=m ++CONFIG_IR_SANYO_DECODER=m ++CONFIG_IR_SHARP_DECODER=m ++CONFIG_IR_MCE_KBD_DECODER=m ++CONFIG_IR_XMP_DECODER=m ++CONFIG_IR_IMON_DECODER=m ++CONFIG_IR_RCMM_DECODER=m ++CONFIG_RC_DEVICES=y ++CONFIG_RC_ATI_REMOTE=m ++CONFIG_IR_ENE=m ++CONFIG_IR_HIX5HD2=m ++CONFIG_IR_IMON=m ++CONFIG_IR_IMON_RAW=m ++CONFIG_IR_MCEUSB=m ++CONFIG_IR_ITE_CIR=m ++CONFIG_IR_FINTEK=m ++CONFIG_IR_NUVOTON=m ++CONFIG_IR_REDRAT3=m ++CONFIG_IR_SPI=m ++CONFIG_IR_STREAMZAP=m ++CONFIG_IR_IGORPLUGUSB=m ++CONFIG_IR_IGUANA=m ++CONFIG_IR_TTUSBIR=m ++CONFIG_RC_LOOPBACK=m ++CONFIG_IR_GPIO_CIR=m ++CONFIG_IR_GPIO_TX=m ++CONFIG_IR_PWM_TX=m ++CONFIG_IR_SERIAL=m ++CONFIG_IR_SERIAL_TRANSMITTER=y ++CONFIG_IR_SIR=m ++CONFIG_MEDIA_SUPPORT=y ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y ++CONFIG_MEDIA_RADIO_SUPPORT=y ++CONFIG_MEDIA_SDR_SUPPORT=y ++CONFIG_MEDIA_CEC_SUPPORT=y ++CONFIG_MEDIA_CEC_RC=y ++CONFIG_MEDIA_CONTROLLER_REQUEST_API=y ++CONFIG_VIDEO_V4L2_SUBDEV_API=y ++CONFIG_DVB_MAX_ADAPTERS=8 ++CONFIG_DVB_DYNAMIC_MINORS=y ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_M5602=m ++CONFIG_USB_STV06XX=m ++CONFIG_USB_GL860=m ++CONFIG_USB_GSPCA_BENQ=m ++CONFIG_USB_GSPCA_CONEX=m ++CONFIG_USB_GSPCA_CPIA1=m ++CONFIG_USB_GSPCA_DTCS033=m ++CONFIG_USB_GSPCA_ETOMS=m ++CONFIG_USB_GSPCA_FINEPIX=m ++CONFIG_USB_GSPCA_JEILINJ=m ++CONFIG_USB_GSPCA_JL2005BCD=m ++CONFIG_USB_GSPCA_KINECT=m ++CONFIG_USB_GSPCA_KONICA=m ++CONFIG_USB_GSPCA_MARS=m ++CONFIG_USB_GSPCA_MR97310A=m ++CONFIG_USB_GSPCA_NW80X=m ++CONFIG_USB_GSPCA_OV519=m ++CONFIG_USB_GSPCA_OV534=m ++CONFIG_USB_GSPCA_OV534_9=m ++CONFIG_USB_GSPCA_PAC207=m ++CONFIG_USB_GSPCA_PAC7302=m ++CONFIG_USB_GSPCA_PAC7311=m ++CONFIG_USB_GSPCA_SE401=m ++CONFIG_USB_GSPCA_SN9C2028=m ++CONFIG_USB_GSPCA_SN9C20X=m ++CONFIG_USB_GSPCA_SONIXB=m ++CONFIG_USB_GSPCA_SONIXJ=m ++CONFIG_USB_GSPCA_SPCA500=m ++CONFIG_USB_GSPCA_SPCA501=m ++CONFIG_USB_GSPCA_SPCA505=m ++CONFIG_USB_GSPCA_SPCA506=m ++CONFIG_USB_GSPCA_SPCA508=m ++CONFIG_USB_GSPCA_SPCA561=m ++CONFIG_USB_GSPCA_SPCA1528=m ++CONFIG_USB_GSPCA_SQ905=m ++CONFIG_USB_GSPCA_SQ905C=m ++CONFIG_USB_GSPCA_SQ930X=m ++CONFIG_USB_GSPCA_STK014=m ++CONFIG_USB_GSPCA_STK1135=m ++CONFIG_USB_GSPCA_STV0680=m ++CONFIG_USB_GSPCA_SUNPLUS=m ++CONFIG_USB_GSPCA_T613=m ++CONFIG_USB_GSPCA_TOPRO=m ++CONFIG_USB_GSPCA_TOUPTEK=m ++CONFIG_USB_GSPCA_TV8532=m ++CONFIG_USB_GSPCA_VC032X=m ++CONFIG_USB_GSPCA_VICAM=m ++CONFIG_USB_GSPCA_XIRLINK_CIT=m ++CONFIG_USB_GSPCA_ZC3XX=m ++CONFIG_USB_PWC=m ++CONFIG_VIDEO_CPIA2=m ++CONFIG_USB_ZR364XX=m ++CONFIG_USB_STKWEBCAM=m ++CONFIG_USB_S2255=m ++CONFIG_VIDEO_USBTV=m ++CONFIG_VIDEO_PVRUSB2=m ++CONFIG_VIDEO_HDPVR=m ++CONFIG_VIDEO_USBVISION=m ++CONFIG_VIDEO_STK1160_COMMON=m ++CONFIG_VIDEO_GO7007=m ++CONFIG_VIDEO_GO7007_USB=m ++CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m ++CONFIG_VIDEO_AU0828=m ++CONFIG_VIDEO_AU0828_RC=y ++CONFIG_VIDEO_CX231XX=m ++CONFIG_VIDEO_CX231XX_ALSA=m ++CONFIG_VIDEO_CX231XX_DVB=m ++CONFIG_VIDEO_TM6000=m ++CONFIG_VIDEO_TM6000_ALSA=m ++CONFIG_VIDEO_TM6000_DVB=m ++CONFIG_DVB_USB=m ++CONFIG_DVB_USB_A800=m ++CONFIG_DVB_USB_DIBUSB_MB=m ++CONFIG_DVB_USB_DIBUSB_MC=m ++CONFIG_DVB_USB_DIB0700=m ++CONFIG_DVB_USB_UMT_010=m ++CONFIG_DVB_USB_CXUSB=m ++CONFIG_DVB_USB_M920X=m ++CONFIG_DVB_USB_DIGITV=m ++CONFIG_DVB_USB_VP7045=m ++CONFIG_DVB_USB_VP702X=m ++CONFIG_DVB_USB_GP8PSK=m ++CONFIG_DVB_USB_NOVA_T_USB2=m ++CONFIG_DVB_USB_TTUSB2=m ++CONFIG_DVB_USB_DTT200U=m ++CONFIG_DVB_USB_OPERA1=m ++CONFIG_DVB_USB_AF9005=m ++CONFIG_DVB_USB_AF9005_REMOTE=m ++CONFIG_DVB_USB_PCTV452E=m ++CONFIG_DVB_USB_DW2102=m ++CONFIG_DVB_USB_CINERGY_T2=m ++CONFIG_DVB_USB_DTV5100=m ++CONFIG_DVB_USB_AZ6027=m ++CONFIG_DVB_USB_TECHNISAT_USB2=m ++CONFIG_DVB_USB_V2=m ++CONFIG_DVB_USB_AF9015=m ++CONFIG_DVB_USB_AF9035=m ++CONFIG_DVB_USB_ANYSEE=m ++CONFIG_DVB_USB_AU6610=m ++CONFIG_DVB_USB_AZ6007=m ++CONFIG_DVB_USB_CE6230=m ++CONFIG_DVB_USB_EC168=m ++CONFIG_DVB_USB_GL861=m ++CONFIG_DVB_USB_LME2510=m ++CONFIG_DVB_USB_MXL111SF=m ++CONFIG_DVB_USB_RTL28XXU=m ++CONFIG_DVB_USB_DVBSKY=m ++CONFIG_DVB_USB_ZD1301=m ++CONFIG_DVB_TTUSB_BUDGET=m ++CONFIG_DVB_TTUSB_DEC=m ++CONFIG_SMS_USB_DRV=m ++CONFIG_DVB_B2C2_FLEXCOP_USB=m ++CONFIG_DVB_AS102=m ++CONFIG_VIDEO_EM28XX=m ++CONFIG_VIDEO_EM28XX_V4L2=m ++CONFIG_VIDEO_EM28XX_ALSA=m ++CONFIG_VIDEO_EM28XX_DVB=m ++CONFIG_USB_AIRSPY=m ++CONFIG_USB_HACKRF=m ++CONFIG_USB_PULSE8_CEC=m ++CONFIG_USB_RAINSHADOW_CEC=m ++CONFIG_MEDIA_PCI_SUPPORT=y ++CONFIG_VIDEO_SOLO6X10=m ++CONFIG_VIDEO_TW68=m ++CONFIG_VIDEO_IVTV=m ++CONFIG_VIDEO_IVTV_ALSA=m ++CONFIG_VIDEO_FB_IVTV=m ++CONFIG_VIDEO_HEXIUM_GEMINI=m ++CONFIG_VIDEO_HEXIUM_ORION=m ++CONFIG_VIDEO_MXB=m ++CONFIG_VIDEO_DT3155=m ++CONFIG_VIDEO_CX18=m ++CONFIG_VIDEO_CX18_ALSA=m ++CONFIG_VIDEO_CX23885=m ++CONFIG_MEDIA_ALTERA_CI=m ++CONFIG_VIDEO_CX25821=m ++CONFIG_VIDEO_CX25821_ALSA=m ++CONFIG_VIDEO_CX88=m ++CONFIG_VIDEO_CX88_ALSA=m ++CONFIG_VIDEO_CX88_BLACKBIRD=m ++CONFIG_VIDEO_CX88_DVB=m ++CONFIG_VIDEO_BT848=m ++CONFIG_DVB_BT8XX=m ++CONFIG_VIDEO_SAA7134=m ++CONFIG_VIDEO_SAA7134_ALSA=m ++CONFIG_VIDEO_SAA7134_DVB=m ++CONFIG_VIDEO_SAA7134_GO7007=m ++CONFIG_VIDEO_SAA7164=m ++CONFIG_DVB_AV7110=m ++CONFIG_DVB_BUDGET_CORE=m ++CONFIG_DVB_BUDGET=m ++CONFIG_DVB_BUDGET_CI=m ++CONFIG_DVB_BUDGET_AV=m ++CONFIG_DVB_BUDGET_PATCH=m ++CONFIG_DVB_B2C2_FLEXCOP_PCI=m ++CONFIG_DVB_PLUTO2=m ++CONFIG_DVB_DM1105=m ++CONFIG_DVB_PT1=m ++CONFIG_DVB_PT3=m ++CONFIG_MANTIS_CORE=m ++CONFIG_DVB_MANTIS=m ++CONFIG_DVB_HOPPER=m ++CONFIG_DVB_NGENE=m ++CONFIG_DVB_DDBRIDGE=m ++CONFIG_DVB_SMIPCIE=m ++CONFIG_V4L_PLATFORM_DRIVERS=y ++CONFIG_V4L_MEM2MEM_DRIVERS=y ++CONFIG_VIDEO_ROCKCHIP_RGA=m ++CONFIG_SMS_SDIO_DRV=m ++CONFIG_RADIO_SI470X=m ++CONFIG_USB_SI470X=m ++CONFIG_I2C_SI470X=m ++CONFIG_RADIO_SI4713=m ++CONFIG_USB_SI4713=m ++CONFIG_PLATFORM_SI4713=m ++CONFIG_USB_MR800=m ++CONFIG_USB_DSBR=m ++CONFIG_RADIO_MAXIRADIO=m ++CONFIG_RADIO_SHARK=m ++CONFIG_RADIO_SHARK2=m ++CONFIG_USB_KEENE=m ++CONFIG_USB_RAREMONO=m ++CONFIG_USB_MA901=m ++CONFIG_RADIO_TEA5764=m ++CONFIG_RADIO_SAA7706H=m ++CONFIG_RADIO_TEF6862=m ++CONFIG_RADIO_WL1273=m ++CONFIG_DRM=m ++CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_I2C_NXP_TDA998X=m ++CONFIG_DRM_HDLCD=m ++CONFIG_DRM_MALI_DISPLAY=m ++CONFIG_DRM_RADEON=m ++CONFIG_DRM_RADEON_USERPTR=y ++CONFIG_DRM_AMDGPU=m ++CONFIG_DRM_NOUVEAU=m ++CONFIG_DRM_VGEM=m ++CONFIG_DRM_ROCKCHIP=m ++CONFIG_ROCKCHIP_ANALOGIX_DP=y ++CONFIG_ROCKCHIP_CDN_DP=y ++CONFIG_ROCKCHIP_DW_HDMI=y ++CONFIG_ROCKCHIP_DW_MIPI_DSI=y ++CONFIG_ROCKCHIP_INNO_HDMI=y ++CONFIG_ROCKCHIP_LVDS=y ++CONFIG_ROCKCHIP_RGB=y ++CONFIG_DRM_UDL=m ++CONFIG_DRM_AST=m ++CONFIG_DRM_MGAG200=m ++CONFIG_DRM_CIRRUS_QEMU=m ++CONFIG_DRM_QXL=m ++CONFIG_DRM_BOCHS=m ++CONFIG_DRM_VIRTIO_GPU=m ++CONFIG_DRM_PANEL_SIMPLE=m ++CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=m ++CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m ++CONFIG_DRM_ANALOGIX_ANX78XX=m ++CONFIG_DRM_NXP_PTN3460=m ++CONFIG_DRM_PARADE_PS8622=m ++CONFIG_DRM_SIL_SII8620=m ++CONFIG_DRM_SII902X=m ++CONFIG_DRM_TOSHIBA_TC358767=m ++CONFIG_DRM_TI_TFP410=m ++CONFIG_DRM_I2C_ADV7511=m ++CONFIG_DRM_I2C_ADV7511_AUDIO=y ++CONFIG_DRM_DW_HDMI_CEC=m ++CONFIG_DRM_HISI_KIRIN=m ++CONFIG_DRM_PL111=m ++CONFIG_DRM_PANFROST=m ++CONFIG_FB=y ++CONFIG_FIRMWARE_EDID=y ++CONFIG_FB_TILEBLITTING=y ++CONFIG_FB_UDL=m ++CONFIG_FB_VIRTUAL=m ++CONFIG_FB_SIMPLE=y ++CONFIG_FB_SSD1307=m ++CONFIG_LCD_CLASS_DEVICE=m ++CONFIG_LCD_PLATFORM=m ++CONFIG_BACKLIGHT_CLASS_DEVICE=y ++CONFIG_BACKLIGHT_GENERIC=m ++CONFIG_BACKLIGHT_PWM=m ++CONFIG_BACKLIGHT_LP855X=m ++CONFIG_BACKLIGHT_GPIO=m ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y ++CONFIG_SOUND=y ++CONFIG_SND=y ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_HRTIMER=m ++# CONFIG_SND_SUPPORT_OLD_API is not set ++CONFIG_SND_VERBOSE_PRINTK=y ++CONFIG_SND_DEBUG=y ++CONFIG_SND_DEBUG_VERBOSE=y ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_SEQUENCER_OSS=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_AC97_POWER_SAVE=y ++CONFIG_SND_AD1889=m ++CONFIG_SND_ATIIXP=m ++CONFIG_SND_ATIIXP_MODEM=m ++CONFIG_SND_AU8810=m ++CONFIG_SND_AU8820=m ++CONFIG_SND_AU8830=m ++CONFIG_SND_BT87X=m ++CONFIG_SND_CA0106=m ++CONFIG_SND_CMIPCI=m ++CONFIG_SND_OXYGEN=m ++CONFIG_SND_CS4281=m ++CONFIG_SND_CS46XX=m ++CONFIG_SND_CTXFI=m ++CONFIG_SND_DARLA20=m ++CONFIG_SND_GINA20=m ++CONFIG_SND_LAYLA20=m ++CONFIG_SND_DARLA24=m ++CONFIG_SND_GINA24=m ++CONFIG_SND_LAYLA24=m ++CONFIG_SND_MONA=m ++CONFIG_SND_MIA=m ++CONFIG_SND_ECHO3G=m ++CONFIG_SND_INDIGO=m ++CONFIG_SND_INDIGOIO=m ++CONFIG_SND_INDIGODJ=m ++CONFIG_SND_INDIGOIOX=m ++CONFIG_SND_INDIGODJX=m ++CONFIG_SND_ENS1370=m ++CONFIG_SND_ENS1371=m ++CONFIG_SND_FM801=m ++CONFIG_SND_FM801_TEA575X_BOOL=y ++CONFIG_SND_HDSP=m ++CONFIG_SND_HDSPM=m ++CONFIG_SND_ICE1724=m ++CONFIG_SND_INTEL8X0=m ++CONFIG_SND_INTEL8X0M=m ++CONFIG_SND_KORG1212=m ++CONFIG_SND_LOLA=m ++CONFIG_SND_LX6464ES=m ++CONFIG_SND_MIXART=m ++CONFIG_SND_NM256=m ++CONFIG_SND_PCXHR=m ++CONFIG_SND_RIPTIDE=m ++CONFIG_SND_RME32=m ++CONFIG_SND_RME96=m ++CONFIG_SND_RME9652=m ++CONFIG_SND_VIA82XX=m ++CONFIG_SND_VIA82XX_MODEM=m ++CONFIG_SND_VIRTUOSO=m ++CONFIG_SND_VX222=m ++CONFIG_SND_YMFPCI=m ++CONFIG_SND_HDA_INTEL=m ++CONFIG_SND_HDA_HWDEP=y ++CONFIG_SND_HDA_INPUT_BEEP=y ++CONFIG_SND_HDA_INPUT_BEEP_MODE=0 ++CONFIG_SND_HDA_PATCH_LOADER=y ++CONFIG_SND_HDA_CODEC_REALTEK=m ++CONFIG_SND_HDA_CODEC_ANALOG=m ++CONFIG_SND_HDA_CODEC_SIGMATEL=m ++CONFIG_SND_HDA_CODEC_VIA=m ++CONFIG_SND_HDA_CODEC_HDMI=m ++CONFIG_SND_HDA_CODEC_CIRRUS=m ++CONFIG_SND_HDA_CODEC_CONEXANT=m ++CONFIG_SND_HDA_CODEC_CA0110=m ++CONFIG_SND_HDA_CODEC_CA0132=m ++CONFIG_SND_HDA_CODEC_CA0132_DSP=y ++CONFIG_SND_HDA_CODEC_CMEDIA=m ++CONFIG_SND_HDA_CODEC_SI3054=m ++CONFIG_SND_HDA_PREALLOC_SIZE=4096 ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_CAIAQ_INPUT=y ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SND_USB_HIFACE=m ++CONFIG_SND_USB_POD=m ++CONFIG_SND_USB_PODHD=m ++CONFIG_SND_USB_TONEPORT=m ++CONFIG_SND_USB_VARIAX=m ++CONFIG_SND_SOC=y ++CONFIG_SND_SOC_AMD_ACP=m ++CONFIG_SND_I2S_HI6210_I2S=m ++CONFIG_SND_SOC_ROCKCHIP=m ++CONFIG_SND_SOC_ROCKCHIP_PDM=m ++CONFIG_SND_SOC_ROCKCHIP_SPDIF=m ++CONFIG_SND_SOC_ROCKCHIP_MAX98090=m ++CONFIG_SND_SOC_ROCKCHIP_RT5645=m ++CONFIG_SND_SOC_RK3288_HDMI_ANALOG=m ++CONFIG_SND_SOC_RK3399_GRU_SOUND=m ++CONFIG_SND_SOC_CROS_EC_CODEC=m ++CONFIG_SND_SOC_ES8316=m ++CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y ++CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y ++CONFIG_SND_SOC_PCM3168A_I2C=m ++CONFIG_SND_SOC_RK3328=m ++CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m ++CONFIG_SND_SIMPLE_CARD=m ++CONFIG_SND_AUDIO_GRAPH_CARD=m ++CONFIG_HID_BATTERY_STRENGTH=y ++CONFIG_HIDRAW=y ++CONFIG_UHID=m ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACCUTOUCH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_ACRUX_FF=y ++CONFIG_HID_APPLE=m ++CONFIG_HID_APPLEIR=m ++CONFIG_HID_AUREAL=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_BETOP_FF=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CORSAIR=m ++CONFIG_HID_COUGAR=m ++CONFIG_HID_MACALLY=m ++CONFIG_HID_PRODIKEYS=m ++CONFIG_HID_CMEDIA=m ++CONFIG_HID_CP2112=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_DRAGONRISE_FF=y ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_ELO=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_GEMBIRD=m ++CONFIG_HID_GFRM=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HOLTEK_FF=y ++CONFIG_HID_GT683R=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_VIEWSONIC=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_ICADE=m ++CONFIG_HID_ITE=m ++CONFIG_HID_JABRA=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LENOVO=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_LOGITECH_DJ=m ++CONFIG_LOGITECH_FF=y ++CONFIG_LOGIRUMBLEPAD2_FF=y ++CONFIG_LOGIG940_FF=y ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MALTRON=m ++CONFIG_HID_MAYFLASH=m ++CONFIG_HID_REDRAGON=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTI=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_PANTHERLORD_FF=y ++CONFIG_HID_PENMOUNT=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_PICOLCD_FB=y ++CONFIG_HID_PICOLCD_BACKLIGHT=y ++CONFIG_HID_PICOLCD_LCD=y ++CONFIG_HID_PICOLCD_LEDS=y ++CONFIG_HID_PICOLCD_CIR=y ++CONFIG_HID_PLANTRONICS=m ++CONFIG_HID_PRIMAX=m ++CONFIG_HID_RETRODE=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAITEK=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_SONY_FF=y ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_STEAM=m ++CONFIG_HID_STEELSERIES=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_RMI=m ++CONFIG_HID_GREENASIA=m ++CONFIG_GREENASIA_FF=y ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_SMARTJOYPLUS_FF=y ++CONFIG_HID_TIVO=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THINGM=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_THRUSTMASTER_FF=y ++CONFIG_HID_UDRAW_PS3=m ++CONFIG_HID_U2FZERO=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_XINMO=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_ZEROPLUS_FF=y ++CONFIG_HID_ZYDACRON=m ++CONFIG_HID_SENSOR_HUB=m ++CONFIG_HID_SENSOR_CUSTOM_SENSOR=m ++CONFIG_HID_ALPS=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_I2C_HID=m ++CONFIG_USB_LED_TRIG=y ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_OTG=y ++CONFIG_USB_MON=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_HCD_PLATFORM=y ++CONFIG_USB_MAX3421_HCD=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_OHCI_HCD_PLATFORM=y ++CONFIG_USB_UHCI_HCD=y ++CONFIG_USB_U132_HCD=m ++CONFIG_USB_SL811_HCD=m ++CONFIG_USB_SL811_HCD_ISO=y ++CONFIG_USB_PRINTER=m ++CONFIG_USB_TMC=m ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=y ++CONFIG_USB_STORAGE_DATAFAB=y ++CONFIG_USB_STORAGE_FREECOM=y ++CONFIG_USB_STORAGE_ISD200=y ++CONFIG_USB_STORAGE_USBAT=y ++CONFIG_USB_STORAGE_SDDR09=y ++CONFIG_USB_STORAGE_SDDR55=y ++CONFIG_USB_STORAGE_JUMPSHOT=y ++CONFIG_USB_STORAGE_ALAUDA=y ++CONFIG_USB_STORAGE_ONETOUCH=y ++CONFIG_USB_STORAGE_KARMA=y ++CONFIG_USB_STORAGE_CYPRESS_ATACB=y ++CONFIG_USB_STORAGE_ENE_UB6250=y ++CONFIG_USB_UAS=y ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USBIP_CORE=m ++CONFIG_USBIP_VHCI_HCD=m ++CONFIG_USBIP_HOST=m ++CONFIG_USBIP_VUDC=m ++CONFIG_USB_MUSB_HDRC=y ++CONFIG_USB_DWC3=y ++CONFIG_USB_DWC3_ULPI=y ++CONFIG_USB_DWC2=y ++CONFIG_USB_DWC2_PCI=y ++CONFIG_USB_CHIPIDEA=y ++CONFIG_USB_CHIPIDEA_UDC=y ++CONFIG_USB_CHIPIDEA_HOST=y ++CONFIG_USB_ISP1760=y ++CONFIG_USB_SERIAL=y ++CONFIG_USB_SERIAL_CONSOLE=y ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_SIMPLE=m ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_F81232=m ++CONFIG_USB_SERIAL_F8153X=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_METRO=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_MXUPORT=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SAFE_PADDED=y ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_XSENS_MT=m ++CONFIG_USB_SERIAL_WISHBONE=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_QT2=m ++CONFIG_USB_SERIAL_UPD78F0730=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_SISUSBVGA=m ++CONFIG_USB_SISUSBVGA_CON=y ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_USB_HSIC_USB3503=y ++CONFIG_USB_HSIC_USB4604=y ++CONFIG_USB_CHAOSKEY=m ++CONFIG_USB_ATM=m ++CONFIG_USB_CXACRU=m ++CONFIG_USB_UEAGLEATM=m ++CONFIG_USB_XUSBATM=m ++CONFIG_USB_GPIO_VBUS=y ++CONFIG_USB_ISP1301=y ++CONFIG_USB_ULPI=y ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_VBUS_DRAW=500 ++CONFIG_USB_CONFIGFS=m ++CONFIG_USB_CONFIGFS_SERIAL=y ++CONFIG_USB_CONFIGFS_ACM=y ++CONFIG_USB_CONFIGFS_OBEX=y ++CONFIG_USB_CONFIGFS_NCM=y ++CONFIG_USB_CONFIGFS_ECM=y ++CONFIG_USB_CONFIGFS_ECM_SUBSET=y ++CONFIG_USB_CONFIGFS_RNDIS=y ++CONFIG_USB_CONFIGFS_EEM=y ++CONFIG_USB_CONFIGFS_MASS_STORAGE=y ++CONFIG_USB_CONFIGFS_F_FS=y ++CONFIG_USB_CONFIGFS_F_UAC1=y ++CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y ++CONFIG_USB_CONFIGFS_F_UAC2=y ++CONFIG_USB_CONFIGFS_F_MIDI=y ++CONFIG_USB_CONFIGFS_F_HID=y ++CONFIG_USB_CONFIGFS_F_UVC=y ++CONFIG_USB_CONFIGFS_F_PRINTER=y ++CONFIG_USB_CONFIGFS_F_TCM=y ++CONFIG_USB_AUDIO=m ++CONFIG_GADGET_UAC1=y ++CONFIG_USB_ETH=m ++CONFIG_USB_ETH_EEM=y ++CONFIG_USB_G_NCM=m ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FUNCTIONFS=m ++CONFIG_USB_FUNCTIONFS_ETH=y ++CONFIG_USB_FUNCTIONFS_RNDIS=y ++CONFIG_USB_FUNCTIONFS_GENERIC=y ++CONFIG_USB_MASS_STORAGE=m ++CONFIG_USB_GADGET_TARGET=m ++CONFIG_USB_G_SERIAL=m ++CONFIG_USB_MIDI_GADGET=m ++CONFIG_USB_G_PRINTER=m ++CONFIG_USB_CDC_COMPOSITE=m ++CONFIG_USB_G_ACM_MS=m ++CONFIG_USB_G_MULTI=m ++CONFIG_USB_G_MULTI_CDC=y ++CONFIG_USB_G_HID=m ++CONFIG_USB_G_WEBCAM=m ++CONFIG_TYPEC=y ++CONFIG_TYPEC_TCPM=y ++CONFIG_TYPEC_TCPCI=y ++CONFIG_TYPEC_FUSB302=y ++CONFIG_MMC=y ++CONFIG_PWRSEQ_SD8787=m ++CONFIG_MMC_BLOCK_MINORS=32 ++CONFIG_SDIO_UART=m ++CONFIG_MMC_ARMMMCI=y ++# CONFIG_MMC_STM32_SDMMC is not set ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PCI=y ++CONFIG_MMC_SDHCI_ACPI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SDHCI_OF_ARASAN=y ++CONFIG_MMC_SDHCI_OF_AT91=y ++CONFIG_MMC_SDHCI_CADENCE=y ++CONFIG_MMC_SDHCI_F_SDH30=y ++CONFIG_MMC_TIFM_SD=y ++CONFIG_MMC_SPI=y ++CONFIG_MMC_CB710=y ++CONFIG_MMC_VIA_SDMMC=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_EXYNOS=y ++CONFIG_MMC_DW_K3=y ++CONFIG_MMC_DW_PCI=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_VUB300=m ++CONFIG_MMC_USHC=m ++CONFIG_MMC_USDHI6ROL0=y ++CONFIG_MMC_TOSHIBA_PCI=y ++CONFIG_MMC_MTK=y ++CONFIG_MMC_SDHCI_XENON=y ++CONFIG_MEMSTICK=m ++CONFIG_MSPRO_BLOCK=m ++CONFIG_MEMSTICK_TIFM_MS=m ++CONFIG_MEMSTICK_JMICRON_38X=m ++CONFIG_MEMSTICK_R592=m ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_CLASS_FLASH=m ++CONFIG_LEDS_LM3530=m ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_LP3944=m ++CONFIG_LEDS_PCA955X=m ++CONFIG_LEDS_PCA963X=m ++CONFIG_LEDS_PWM=m ++CONFIG_LEDS_LT3593=m ++CONFIG_LEDS_BLINKM=m ++CONFIG_LEDS_SYSCON=y ++CONFIG_LEDS_USER=m ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_DISK=y ++CONFIG_LEDS_TRIGGER_MTD=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_BACKLIGHT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_ACTIVITY=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_LEDS_TRIGGER_TRANSIENT=y ++CONFIG_LEDS_TRIGGER_CAMERA=y ++CONFIG_LEDS_TRIGGER_PANIC=y ++CONFIG_LEDS_TRIGGER_NETDEV=y ++CONFIG_LEDS_TRIGGER_PATTERN=m ++CONFIG_LEDS_TRIGGER_AUDIO=m ++CONFIG_ACCESSIBILITY=y ++CONFIG_A11Y_BRAILLE_CONSOLE=y ++CONFIG_EDAC=y ++CONFIG_EDAC_XGENE=m ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_SYSTOHC is not set ++CONFIG_RTC_INTF_DEV_UIE_EMUL=y ++CONFIG_RTC_DRV_ABX80X=m ++CONFIG_RTC_DRV_DS1307=m ++CONFIG_RTC_DRV_DS1374=m ++CONFIG_RTC_DRV_DS1374_WDT=y ++CONFIG_RTC_DRV_DS1672=m ++CONFIG_RTC_DRV_MAX6900=m ++CONFIG_RTC_DRV_RK808=m ++CONFIG_RTC_DRV_RS5C372=m ++CONFIG_RTC_DRV_ISL1208=m ++CONFIG_RTC_DRV_ISL12022=m ++CONFIG_RTC_DRV_X1205=m ++CONFIG_RTC_DRV_PCF8523=m ++CONFIG_RTC_DRV_PCF85063=m ++CONFIG_RTC_DRV_PCF85363=m ++CONFIG_RTC_DRV_PCF8563=m ++CONFIG_RTC_DRV_PCF8583=m ++CONFIG_RTC_DRV_M41T80=m ++CONFIG_RTC_DRV_M41T80_WDT=y ++CONFIG_RTC_DRV_BQ32K=m ++CONFIG_RTC_DRV_FM3130=m ++CONFIG_RTC_DRV_RX8581=m ++CONFIG_RTC_DRV_RX8025=m ++CONFIG_RTC_DRV_EM3027=m ++CONFIG_RTC_DRV_DS3232=m ++CONFIG_RTC_DRV_PCF2127=m ++CONFIG_RTC_DRV_RV3029C2=m ++CONFIG_RTC_DRV_DS1286=m ++CONFIG_RTC_DRV_DS1511=m ++CONFIG_RTC_DRV_DS1553=m ++CONFIG_RTC_DRV_DS1685_FAMILY=m ++CONFIG_RTC_DRV_DS1742=m ++CONFIG_RTC_DRV_DS2404=m ++CONFIG_RTC_DRV_EFI=y ++CONFIG_RTC_DRV_STK17TA8=m ++CONFIG_RTC_DRV_M48T35=m ++CONFIG_RTC_DRV_M48T59=m ++CONFIG_RTC_DRV_MSM6242=m ++CONFIG_RTC_DRV_BQ4802=m ++CONFIG_RTC_DRV_RP5C01=m ++CONFIG_RTC_DRV_V3020=m ++CONFIG_RTC_DRV_CROS_EC=y ++CONFIG_RTC_DRV_PL031=y ++CONFIG_MV_XOR_V2=y ++CONFIG_PL330_DMA=y ++CONFIG_QCOM_HIDMA_MGMT=y ++CONFIG_QCOM_HIDMA=y ++CONFIG_DW_DMAC=m ++CONFIG_DW_DMAC_PCI=m ++CONFIG_ASYNC_TX_DMA=y ++CONFIG_AUXDISPLAY=y ++CONFIG_UIO_CIF=m ++CONFIG_UIO_AEC=m ++CONFIG_UIO_SERCOS3=m ++CONFIG_UIO_PCI_GENERIC=m ++CONFIG_VFIO=m ++CONFIG_VFIO_PCI=m ++CONFIG_VFIO_PLATFORM=m ++CONFIG_VFIO_AMBA=m ++CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m ++CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m ++CONFIG_VIRTIO_PCI=y ++CONFIG_VIRTIO_BALLOON=m ++CONFIG_VIRTIO_INPUT=m ++CONFIG_VIRTIO_MMIO=m ++CONFIG_STAGING=y ++CONFIG_PRISM2_USB=m ++CONFIG_RTL8192U=m ++CONFIG_RTLLIB=m ++CONFIG_RTL8192E=m ++CONFIG_R8712U=m ++CONFIG_R8188EU=m ++CONFIG_ADIS16203=m ++CONFIG_ADIS16240=m ++CONFIG_AD7816=m ++CONFIG_AD7192=m ++CONFIG_AD7280=m ++CONFIG_ADT7316=m ++CONFIG_ADT7316_I2C=m ++CONFIG_AD7150=m ++CONFIG_AD7746=m ++CONFIG_AD9832=m ++CONFIG_AD9834=m ++CONFIG_AD5933=m ++CONFIG_ADE7854=m ++CONFIG_AD2S1210=m ++CONFIG_STAGING_MEDIA=y ++CONFIG_VIDEO_HANTRO=y ++CONFIG_FB_TFT=m ++CONFIG_FB_TFT_AGM1264K_FL=m ++CONFIG_FB_TFT_BD663474=m ++CONFIG_FB_TFT_HX8340BN=m ++CONFIG_FB_TFT_HX8347D=m ++CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m ++CONFIG_FB_TFT_ILI9163=m ++CONFIG_FB_TFT_ILI9320=m ++CONFIG_FB_TFT_ILI9325=m ++CONFIG_FB_TFT_ILI9340=m ++CONFIG_FB_TFT_ILI9341=m ++CONFIG_FB_TFT_ILI9481=m ++CONFIG_FB_TFT_ILI9486=m ++CONFIG_FB_TFT_PCD8544=m ++CONFIG_FB_TFT_RA8875=m ++CONFIG_FB_TFT_S6D02A1=m ++CONFIG_FB_TFT_S6D1121=m ++CONFIG_FB_TFT_SH1106=m ++CONFIG_FB_TFT_SSD1289=m ++CONFIG_FB_TFT_SSD1305=m ++CONFIG_FB_TFT_SSD1306=m ++CONFIG_FB_TFT_SSD1331=m ++CONFIG_FB_TFT_SSD1351=m ++CONFIG_FB_TFT_ST7735R=m ++CONFIG_FB_TFT_ST7789V=m ++CONFIG_FB_TFT_TINYLCD=m ++CONFIG_FB_TFT_TLS8204=m ++CONFIG_FB_TFT_UC1611=m ++CONFIG_FB_TFT_UC1701=m ++CONFIG_FB_TFT_UPD161704=m ++CONFIG_FB_TFT_WATTEROTT=m ++CONFIG_USB_WUSB_CBAF=m ++CONFIG_USB_HWA_HCD=m ++CONFIG_UWB=m ++CONFIG_UWB_WHCI=m ++CONFIG_UWB_I1480U=m ++CONFIG_MFD_CROS_EC=y ++CONFIG_CHROMEOS_TBMC=m ++CONFIG_CROS_EC_I2C=y ++CONFIG_CROS_EC_RPMSG=m ++CONFIG_CROS_EC_SPI=y ++CONFIG_CROS_KBD_LED_BACKLIGHT=y ++CONFIG_CROS_EC_LIGHTBAR=m ++CONFIG_CROS_EC_VBC=m ++CONFIG_CROS_EC_DEBUGFS=m ++CONFIG_CROS_EC_SYSFS=m ++CONFIG_COMMON_CLK_VERSATILE=y ++CONFIG_CLK_SP810=y ++CONFIG_CLK_VEXPRESS_OSC=y ++CONFIG_COMMON_CLK_RK808=y ++CONFIG_COMMON_CLK_SCPI=y ++CONFIG_COMMON_CLK_XGENE=y ++CONFIG_COMMON_CLK_PWM=y ++CONFIG_HWSPINLOCK=y ++CONFIG_ARM_MHU=y ++CONFIG_PLATFORM_MHU=y ++CONFIG_ROCKCHIP_MBOX=y ++CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y ++CONFIG_ROCKCHIP_IOMMU=y ++CONFIG_ARM_SMMU=y ++CONFIG_ARM_SMMU_V3=y ++CONFIG_REMOTEPROC=y ++CONFIG_RPMSG_CHAR=y ++CONFIG_RPMSG_QCOM_GLINK_RPM=y ++CONFIG_ROCKCHIP_PM_DOMAINS=y ++CONFIG_ARM_RK3399_DMC_DEVFREQ=y ++CONFIG_EXTCON_ADC_JACK=m ++CONFIG_EXTCON_GPIO=y ++CONFIG_EXTCON_USB_GPIO=y ++CONFIG_EXTCON_USBC_CROS_EC=y ++CONFIG_MEMORY=y ++CONFIG_IIO=y ++CONFIG_IIO_BUFFER_CB=y ++CONFIG_IIO_BUFFER_HW_CONSUMER=m ++CONFIG_IIO_SW_DEVICE=m ++CONFIG_IIO_SW_TRIGGER=m ++CONFIG_ADIS16201=m ++CONFIG_ADIS16209=m ++CONFIG_ADXL345_I2C=m ++CONFIG_ADXL345_SPI=m ++CONFIG_ADXL372_SPI=m ++CONFIG_ADXL372_I2C=m ++CONFIG_BMA180=m ++CONFIG_BMA220=m ++CONFIG_BMC150_ACCEL=m ++CONFIG_DA280=m ++CONFIG_DA311=m ++CONFIG_DMARD06=m ++CONFIG_DMARD09=m ++CONFIG_DMARD10=m ++CONFIG_HID_SENSOR_ACCEL_3D=m ++CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m ++CONFIG_IIO_ST_ACCEL_3AXIS=m ++CONFIG_KXSD9=m ++CONFIG_KXCJK1013=m ++CONFIG_MC3230=m ++CONFIG_MMA7455_I2C=m ++CONFIG_MMA7455_SPI=m ++CONFIG_MMA7660=m ++CONFIG_MMA8452=m ++CONFIG_MMA9551=m ++CONFIG_MMA9553=m ++CONFIG_MXC4005=m ++CONFIG_MXC6255=m ++CONFIG_SCA3000=m ++CONFIG_STK8312=m ++CONFIG_STK8BA50=m ++CONFIG_AD7124=m ++CONFIG_AD7266=m ++CONFIG_AD7291=m ++CONFIG_AD7298=m ++CONFIG_AD7476=m ++CONFIG_AD7606_IFACE_PARALLEL=m ++CONFIG_AD7606_IFACE_SPI=m ++CONFIG_AD7766=m ++CONFIG_AD7768_1=m ++CONFIG_AD7780=m ++CONFIG_AD7791=m ++CONFIG_AD7793=m ++CONFIG_AD7887=m ++CONFIG_AD7923=m ++CONFIG_AD7949=m ++CONFIG_AD799X=m ++CONFIG_AXP20X_ADC=m ++CONFIG_AXP288_ADC=m ++CONFIG_CC10001_ADC=m ++CONFIG_ENVELOPE_DETECTOR=m ++CONFIG_HI8435=m ++CONFIG_HX711=m ++CONFIG_INA2XX_ADC=m ++CONFIG_LTC2471=m ++CONFIG_LTC2485=m ++CONFIG_LTC2497=m ++CONFIG_MAX1027=m ++CONFIG_MAX11100=m ++CONFIG_MAX1118=m ++CONFIG_MAX1363=m ++CONFIG_MAX9611=m ++CONFIG_MCP320X=m ++CONFIG_MCP3422=m ++CONFIG_MCP3911=m ++CONFIG_NAU7802=m ++CONFIG_QCOM_SPMI_IADC=m ++CONFIG_QCOM_SPMI_VADC=y ++CONFIG_QCOM_SPMI_ADC5=m ++CONFIG_ROCKCHIP_SARADC=m ++CONFIG_SD_ADC_MODULATOR=m ++CONFIG_TI_ADC081C=m ++CONFIG_TI_ADC0832=m ++CONFIG_TI_ADC084S021=m ++CONFIG_TI_ADC12138=m ++CONFIG_TI_ADC108S102=m ++CONFIG_TI_ADC128S052=m ++CONFIG_TI_ADC161S626=m ++CONFIG_TI_ADS1015=m ++CONFIG_TI_ADS7950=m ++CONFIG_TI_ADS8344=m ++CONFIG_TI_ADS8688=m ++CONFIG_TI_ADS124S08=m ++CONFIG_TI_TLC4541=m ++CONFIG_VF610_ADC=m ++CONFIG_VIPERBOARD_ADC=m ++CONFIG_IIO_RESCALE=m ++CONFIG_AD8366=m ++CONFIG_ATLAS_PH_SENSOR=m ++CONFIG_BME680=m ++CONFIG_CCS811=m ++CONFIG_IAQCORE=m ++CONFIG_PMS7003=m ++CONFIG_SENSIRION_SGP30=m ++CONFIG_SPS30=m ++CONFIG_VZ89X=m ++CONFIG_IIO_CROS_EC_SENSORS_CORE=m ++CONFIG_IIO_CROS_EC_SENSORS=m ++CONFIG_AD5064=m ++CONFIG_AD5360=m ++CONFIG_AD5380=m ++CONFIG_AD5421=m ++CONFIG_AD5446=m ++CONFIG_AD5449=m ++CONFIG_AD5592R=m ++CONFIG_AD5593R=m ++CONFIG_AD5504=m ++CONFIG_AD5624R_SPI=m ++CONFIG_LTC1660=m ++CONFIG_LTC2632=m ++CONFIG_AD5686_SPI=m ++CONFIG_AD5696_I2C=m ++CONFIG_AD5755=m ++CONFIG_AD5758=m ++CONFIG_AD5761=m ++CONFIG_AD5764=m ++CONFIG_AD5791=m ++CONFIG_AD7303=m ++CONFIG_AD8801=m ++CONFIG_DPOT_DAC=m ++CONFIG_DS4424=m ++CONFIG_M62332=m ++CONFIG_MAX517=m ++CONFIG_MAX5821=m ++CONFIG_MCP4725=m ++CONFIG_MCP4922=m ++CONFIG_TI_DAC082S085=m ++CONFIG_TI_DAC5571=m ++CONFIG_TI_DAC7311=m ++CONFIG_TI_DAC7612=m ++CONFIG_VF610_DAC=m ++CONFIG_AD9523=m ++CONFIG_ADF4350=m ++CONFIG_ADIS16080=m ++CONFIG_ADIS16130=m ++CONFIG_ADIS16136=m ++CONFIG_ADIS16260=m ++CONFIG_ADXRS450=m ++CONFIG_BMG160=m ++CONFIG_FXAS21002C=m ++CONFIG_HID_SENSOR_GYRO_3D=m ++CONFIG_MPU3050_I2C=m ++CONFIG_IIO_ST_GYRO_3AXIS=m ++CONFIG_ITG3200=m ++CONFIG_AFE4403=m ++CONFIG_AFE4404=m ++CONFIG_MAX30100=m ++CONFIG_MAX30102=m ++CONFIG_AM2315=m ++CONFIG_DHT11=m ++CONFIG_HDC100X=m ++CONFIG_HID_SENSOR_HUMIDITY=m ++CONFIG_HTS221=m ++CONFIG_HTU21=m ++CONFIG_SI7005=m ++CONFIG_SI7020=m ++CONFIG_ADIS16400=m ++CONFIG_ADIS16480=m ++CONFIG_BMI160_I2C=m ++CONFIG_BMI160_SPI=m ++CONFIG_KMX61=m ++CONFIG_INV_MPU6050_I2C=m ++CONFIG_INV_MPU6050_SPI=m ++CONFIG_IIO_ST_LSM6DSX=m ++CONFIG_ACPI_ALS=m ++CONFIG_ADJD_S311=m ++CONFIG_AL3320A=m ++CONFIG_APDS9300=m ++CONFIG_APDS9960=m ++CONFIG_BH1750=m ++CONFIG_BH1780=m ++CONFIG_CM32181=m ++CONFIG_CM3232=m ++CONFIG_CM3323=m ++CONFIG_CM3605=m ++CONFIG_CM36651=m ++CONFIG_IIO_CROS_EC_LIGHT_PROX=m ++CONFIG_GP2AP020A00F=m ++CONFIG_SENSORS_ISL29018=m ++CONFIG_SENSORS_ISL29028=m ++CONFIG_ISL29125=m ++CONFIG_HID_SENSOR_ALS=m ++CONFIG_HID_SENSOR_PROX=m ++CONFIG_JSA1212=m ++CONFIG_RPR0521=m ++CONFIG_LTR501=m ++CONFIG_LV0104CS=m ++CONFIG_MAX44000=m ++CONFIG_MAX44009=m ++CONFIG_OPT3001=m ++CONFIG_PA12203001=m ++CONFIG_SI1133=m ++CONFIG_SI1145=m ++CONFIG_STK3310=m ++CONFIG_ST_UVIS25=m ++CONFIG_TCS3414=m ++CONFIG_TCS3472=m ++CONFIG_SENSORS_TSL2563=m ++CONFIG_TSL2583=m ++CONFIG_TSL2772=m ++CONFIG_TSL4531=m ++CONFIG_US5182D=m ++CONFIG_VCNL4000=m ++CONFIG_VCNL4035=m ++CONFIG_VEML6070=m ++CONFIG_VL6180=m ++CONFIG_ZOPT2201=m ++CONFIG_AK8974=m ++CONFIG_AK09911=m ++CONFIG_BMC150_MAGN_I2C=m ++CONFIG_BMC150_MAGN_SPI=m ++CONFIG_MAG3110=m ++CONFIG_HID_SENSOR_MAGNETOMETER_3D=m ++CONFIG_MMC35240=m ++CONFIG_IIO_ST_MAGN_3AXIS=m ++CONFIG_SENSORS_HMC5843_I2C=m ++CONFIG_SENSORS_HMC5843_SPI=m ++CONFIG_SENSORS_RM3100_I2C=m ++CONFIG_SENSORS_RM3100_SPI=m ++CONFIG_IIO_MUX=y ++CONFIG_HID_SENSOR_INCLINOMETER_3D=m ++CONFIG_HID_SENSOR_DEVICE_ROTATION=m ++CONFIG_IIO_HRTIMER_TRIGGER=m ++CONFIG_IIO_INTERRUPT_TRIGGER=m ++CONFIG_IIO_TIGHTLOOP_TRIGGER=m ++CONFIG_IIO_SYSFS_TRIGGER=m ++CONFIG_AD5272=m ++CONFIG_DS1803=m ++CONFIG_MAX5481=m ++CONFIG_MAX5487=m ++CONFIG_MCP4018=m ++CONFIG_MCP4131=m ++CONFIG_MCP4531=m ++CONFIG_MCP41010=m ++CONFIG_TPL0102=m ++CONFIG_LMP91000=m ++CONFIG_ABP060MG=m ++CONFIG_BMP280=m ++CONFIG_IIO_CROS_EC_BARO=m ++CONFIG_HID_SENSOR_PRESS=m ++CONFIG_HP03=m ++CONFIG_MPL115_I2C=m ++CONFIG_MPL115_SPI=m ++CONFIG_MPL3115=m ++CONFIG_MS5611=m ++CONFIG_MS5611_I2C=m ++CONFIG_MS5611_SPI=m ++CONFIG_MS5637=m ++CONFIG_IIO_ST_PRESS=m ++CONFIG_T5403=m ++CONFIG_HP206C=m ++CONFIG_ZPA2326=m ++CONFIG_AS3935=m ++CONFIG_ISL29501=m ++CONFIG_LIDAR_LITE_V2=m ++CONFIG_MB1232=m ++CONFIG_RFD77402=m ++CONFIG_SRF04=m ++CONFIG_SX9500=m ++CONFIG_SRF08=m ++CONFIG_VL53L0X_I2C=m ++CONFIG_AD2S90=m ++CONFIG_AD2S1200=m ++CONFIG_MAXIM_THERMOCOUPLE=m ++CONFIG_HID_SENSOR_TEMP=m ++CONFIG_MLX90614=m ++CONFIG_MLX90632=m ++CONFIG_TMP006=m ++CONFIG_TMP007=m ++CONFIG_TSYS01=m ++CONFIG_TSYS02D=m ++CONFIG_MAX31856=m ++CONFIG_PWM_CROS_EC=m ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_PHY_XGENE=y ++CONFIG_PHY_QCOM_USB_HS=y ++CONFIG_PHY_QCOM_USB_HSIC=y ++CONFIG_PHY_ROCKCHIP_DP=y ++CONFIG_PHY_ROCKCHIP_EMMC=y ++CONFIG_PHY_ROCKCHIP_INNO_HDMI=y ++CONFIG_PHY_ROCKCHIP_INNO_USB2=y ++CONFIG_PHY_ROCKCHIP_PCIE=y ++CONFIG_PHY_ROCKCHIP_TYPEC=y ++CONFIG_POWERCAP=y ++CONFIG_ARM_CCI_PMU=y ++CONFIG_ARM_CCN=y ++CONFIG_HISI_PMU=y ++CONFIG_LIBNVDIMM=y ++CONFIG_BLK_DEV_PMEM=m ++CONFIG_ND_BLK=m ++CONFIG_ROCKCHIP_EFUSE=y ++CONFIG_MUX_GPIO=y ++CONFIG_VALIDATE_FS_PARSER=y ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_PROC_INFO=y ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_XFS_FS=y ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_GFS2_FS=m ++CONFIG_GFS2_FS_LOCKING_DLM=y ++CONFIG_OCFS2_FS=m ++# CONFIG_OCFS2_FS_STATS is not set ++# CONFIG_OCFS2_DEBUG_MASKLOG is not set ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_F2FS_FS=y ++CONFIG_F2FS_FS_SECURITY=y ++CONFIG_FS_ENCRYPTION=y ++CONFIG_FANOTIFY=y ++CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y ++CONFIG_QUOTA_NETLINK_INTERFACE=y ++# CONFIG_PRINT_QUOTA_WARNING is not set ++CONFIG_QFMT_V2=y ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=y ++CONFIG_CUSE=y ++CONFIG_OVERLAY_FS=m ++CONFIG_FSCACHE=m ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_OBJECT_LIST=y ++CONFIG_CACHEFILES=m ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=y ++CONFIG_NTFS_RW=y ++CONFIG_PROC_KCORE=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_HUGETLBFS=y ++CONFIG_EFIVAR_FS=y ++CONFIG_AFFS_FS=m ++CONFIG_ECRYPT_FS=m ++CONFIG_HFS_FS=m ++CONFIG_HFSPLUS_FS=m ++CONFIG_BEFS_FS=m ++CONFIG_UBIFS_FS=m ++CONFIG_CRAMFS=m ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZ4=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_MINIX_FS=m ++CONFIG_ROMFS_FS=m ++CONFIG_PSTORE=y ++CONFIG_PSTORE_RAM=m ++CONFIG_SYSV_FS=m ++CONFIG_UFS_FS=m ++CONFIG_NFS_FS=y ++# CONFIG_NFS_V2 is not set ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_SWAP=y ++CONFIG_NFS_V4_1=y ++CONFIG_NFS_V4_2=y ++CONFIG_NFSD=m ++CONFIG_NFSD_V3_ACL=y ++CONFIG_NFSD_V4=y ++CONFIG_NFSD_BLOCKLAYOUT=y ++CONFIG_NFSD_SCSILAYOUT=y ++CONFIG_NFSD_FLEXFILELAYOUT=y ++CONFIG_NFSD_V4_SECURITY_LABEL=y ++CONFIG_SUNRPC_DEBUG=y ++CONFIG_CEPH_FS=m ++CONFIG_CEPH_FSCACHE=y ++CONFIG_CEPH_FS_POSIX_ACL=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_UPCALL=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_CIFS_DFS_UPCALL=y ++CONFIG_CIFS_FSCACHE=y ++CONFIG_CODA_FS=m ++CONFIG_9P_FS=m ++CONFIG_9P_FSCACHE=y ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_9P_FS_SECURITY=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_NLS_MAC_ROMAN=m ++CONFIG_NLS_MAC_CELTIC=m ++CONFIG_NLS_MAC_CENTEURO=m ++CONFIG_NLS_MAC_CROATIAN=m ++CONFIG_NLS_MAC_CYRILLIC=m ++CONFIG_NLS_MAC_GAELIC=m ++CONFIG_NLS_MAC_GREEK=m ++CONFIG_NLS_MAC_ICELAND=m ++CONFIG_NLS_MAC_INUIT=m ++CONFIG_NLS_MAC_ROMANIAN=m ++CONFIG_NLS_MAC_TURKISH=m ++CONFIG_DLM=m ++CONFIG_DLM_DEBUG=y ++CONFIG_PERSISTENT_KEYRINGS=y ++CONFIG_BIG_KEYS=y ++CONFIG_TRUSTED_KEYS=m ++CONFIG_ENCRYPTED_KEYS=y ++CONFIG_SECURITY=y ++CONFIG_SECURITY_NETWORK=y ++CONFIG_SECURITY_NETWORK_XFRM=y ++CONFIG_SECURITY_YAMA=y ++# CONFIG_INTEGRITY is not set ++CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor" ++CONFIG_CRYPTO_USER=m ++# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set ++CONFIG_CRYPTO_PCRYPT=m ++CONFIG_CRYPTO_DH=m ++CONFIG_CRYPTO_CHACHA20POLY1305=m ++CONFIG_CRYPTO_AEGIS128=m ++CONFIG_CRYPTO_CFB=m ++CONFIG_CRYPTO_LRW=m ++CONFIG_CRYPTO_OFB=m ++CONFIG_CRYPTO_PCBC=m ++CONFIG_CRYPTO_KEYWRAP=m ++CONFIG_CRYPTO_ADIANTUM=m ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_VMAC=m ++CONFIG_CRYPTO_RMD128=m ++CONFIG_CRYPTO_RMD160=m ++CONFIG_CRYPTO_RMD256=m ++CONFIG_CRYPTO_RMD320=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_ANUBIS=m ++CONFIG_CRYPTO_BLOWFISH=m ++CONFIG_CRYPTO_CAMELLIA=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_CAST6=m ++CONFIG_CRYPTO_FCRYPT=m ++CONFIG_CRYPTO_KHAZAD=m ++CONFIG_CRYPTO_SALSA20=m ++CONFIG_CRYPTO_SEED=m ++CONFIG_CRYPTO_SERPENT=m ++CONFIG_CRYPTO_TEA=m ++CONFIG_CRYPTO_TWOFISH=m ++CONFIG_CRYPTO_842=m ++CONFIG_CRYPTO_LZ4=m ++CONFIG_CRYPTO_LZ4HC=m ++CONFIG_CRYPTO_ANSI_CPRNG=m ++CONFIG_CRYPTO_DRBG_HASH=y ++CONFIG_CRYPTO_DRBG_CTR=y ++CONFIG_CRYPTO_USER_API_HASH=y ++CONFIG_CRYPTO_USER_API_SKCIPHER=y ++CONFIG_CRYPTO_USER_API_RNG=y ++CONFIG_CRYPTO_USER_API_AEAD=y ++CONFIG_CRYPTO_DEV_CCP=y ++CONFIG_CRYPTO_DEV_ROCKCHIP=m ++CONFIG_CRYPTO_DEV_SAFEXCEL=m ++CONFIG_CRYPTO_DEV_CCREE=m ++CONFIG_ASYMMETRIC_KEY_TYPE=y ++CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y ++CONFIG_X509_CERTIFICATE_PARSER=y ++CONFIG_PKCS7_MESSAGE_PARSER=y ++CONFIG_SYSTEM_TRUSTED_KEYRING=y ++# CONFIG_XZ_DEC_X86 is not set ++# CONFIG_XZ_DEC_POWERPC is not set ++# CONFIG_XZ_DEC_IA64 is not set ++# CONFIG_XZ_DEC_SPARC is not set ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=64 ++CONFIG_PRINTK_TIME=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_DYNAMIC_DEBUG=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_STRIP_ASM_SYMS=y ++CONFIG_DEBUG_SECTION_MISMATCH=y ++CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0 ++CONFIG_DEBUG_VM=y ++CONFIG_SOFTLOCKUP_DETECTOR=y ++CONFIG_SCHEDSTATS=y ++CONFIG_STACKTRACE=y ++CONFIG_DEBUG_LIST=y ++CONFIG_RCU_TORTURE_TEST=m ++CONFIG_RCU_CPU_STALL_TIMEOUT=60 ++# CONFIG_RCU_TRACE is not set ++# CONFIG_FTRACE is not set ++# CONFIG_RUNTIME_TESTING_MENU is not set ++CONFIG_KGDB=y ++CONFIG_KGDB_TESTS=y +--- a/drivers/bluetooth/hci_bcm.c ++++ b/drivers/bluetooth/hci_bcm.c +@@ -1416,6 +1416,23 @@ + hci_uart_unregister_device(&bcmdev->serdev_hu); + } + ++static void bcm_serdev_shutdown(struct serdev_device *serdev) ++{ ++ struct bcm_device *bcmdev = serdev_device_get_drvdata(serdev); ++ ++/* ++ if (test_bit(HCI_UART_REGISTERED, &bcmdev->hu->flags)) { ++ hci_uart_unregister_device(&bcmdev->serdev_hu); ++ } ++*/ ++ dev_info(bcmdev->dev, "Cutting power to bluetooth module\n"); ++ if (bcm_gpio_set_power(bcmdev, false)) { ++ dev_err(bcmdev->dev, "Failed to power down\n"); ++ } ++ usleep_range(500000, 1000000); ++} ++ ++ + #ifdef CONFIG_OF + static const struct of_device_id bcm_bluetooth_of_match[] = { + { .compatible = "brcm,bcm20702a1" }, +@@ -1430,6 +1447,7 @@ + static struct serdev_device_driver bcm_serdev_driver = { + .probe = bcm_serdev_probe, + .remove = bcm_serdev_remove, ++ .shutdown = bcm_serdev_shutdown, + .driver = { + .name = "hci_uart_bcm", + .of_match_table = of_match_ptr(bcm_bluetooth_of_match), +--- a/drivers/bluetooth/hci_serdev.c ++++ b/drivers/bluetooth/hci_serdev.c +@@ -364,5 +364,7 @@ + + hu->proto->close(hu); + serdev_device_close(hu->serdev); ++ ++ clear_bit(HCI_UART_REGISTERED, &hu->flags); + } + EXPORT_SYMBOL_GPL(hci_uart_unregister_device); +--- a/drivers/gpu/drm/panel/panel-simple.c ++++ b/drivers/gpu/drm/panel/panel-simple.c +@@ -1033,6 +1033,36 @@ + }, + }; + ++static const struct drm_display_mode boe_nv140fhmn49_modes[] = { ++ { ++ .clock = 148500, ++ .hdisplay = 1920, ++ .hsync_start = 1920 + 48, ++ .hsync_end = 1920 + 48 + 32, ++ .htotal = 2200, ++ .vdisplay = 1080, ++ .vsync_start = 1080 + 3, ++ .vsync_end = 1080 + 3 + 5, ++ .vtotal = 1125, ++ .vrefresh = 60, ++ }, ++}; ++ ++static const struct panel_desc boe_nv140fhmn49 = { ++ .modes = boe_nv140fhmn49_modes, ++ .num_modes = ARRAY_SIZE(boe_nv140fhmn49_modes), ++ .bpc = 8, ++ .size = { ++ .width = 309, ++ .height = 174, ++ }, ++ .delay = { ++ .prepare = 210, ++ .enable = 50, ++ .unprepare = 160, ++ }, ++}; ++ + static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = { + .clock = 9000, + .hdisplay = 480, +@@ -3139,6 +3169,9 @@ + .compatible = "boe,nv101wxmn51", + .data = &boe_nv101wxmn51, + }, { ++ .compatible = "boe,nv140fhmn49", ++ .data = &boe_nv140fhmn49, ++ }, { + .compatible = "cdtech,s043wq26h-ct7", + .data = &cdtech_s043wq26h_ct7, + }, { +@@ -3430,6 +3463,7 @@ + .driver = { + .name = "panel-simple", + .of_match_table = platform_of_match, ++ .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe = panel_simple_platform_probe, + .remove = panel_simple_platform_remove, +--- a/drivers/mfd/rk808.c ++++ b/drivers/mfd/rk808.c +@@ -526,15 +526,26 @@ + struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); + int ret; + +- if (system_state == SYSTEM_POWER_OFF && +- (rk808->variant == RK809_ID || rk808->variant == RK817_ID)) { +- ret = regmap_update_bits(rk808->regmap, +- RK817_SYS_CFG(3), +- RK817_SLPPIN_FUNC_MSK, +- SLPPIN_DN_FUN); +- if (ret) { +- dev_warn(&rk808_i2c_client->dev, +- "Cannot switch to power down function\n"); ++ if (system_state == SYSTEM_POWER_OFF) { ++ switch(rk808->variant) { ++ case RK809_ID: ++ case RK817_ID: ++ ret = regmap_update_bits(rk808->regmap, ++ RK817_SYS_CFG(3), ++ RK817_SLPPIN_FUNC_MSK, ++ SLPPIN_DN_FUN); ++ if (ret) { ++ dev_warn(&rk808_i2c_client->dev, ++ "Cannot switch to power down function\n"); ++ } ++ break; ++ case RK808_ID: ++ if(rk808->use_syscore_powerdown) { ++ rk808_device_shutdown(); ++ } ++ break; ++ default: ++ break; + } + } + } +@@ -617,6 +628,7 @@ + cells = rk808s; + nr_cells = ARRAY_SIZE(rk808s); + rk808->pm_pwroff_fn = rk808_device_shutdown; ++ register_syscore_ops(&rk808_syscore_ops); + break; + case RK818_ID: + rk808->regmap_cfg = &rk818_regmap_config; +@@ -688,9 +700,13 @@ + + pm_off = of_property_read_bool(np, + "rockchip,system-power-controller"); +- if (pm_off && !pm_power_off) { +- rk808_i2c_client = client; +- pm_power_off = rk808->pm_pwroff_fn; ++ if (pm_off) { ++ if (pm_power_off) { ++ rk808->use_syscore_powerdown = true; ++ } else { ++ rk808_i2c_client = client; ++ pm_power_off = rk808->pm_pwroff_fn; ++ } + } + + if (pm_off && !pm_power_off_prepare) { +--- a/drivers/mmc/core/pwrseq_simple.c ++++ b/drivers/mmc/core/pwrseq_simple.c +@@ -80,10 +80,8 @@ + msleep(pwrseq->post_power_on_delay_ms); + } + +-static void mmc_pwrseq_simple_power_off(struct mmc_host *host) ++static void __mmc_pwrseq_simple_power_off(struct mmc_pwrseq_simple *pwrseq) + { +- struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); +- + mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); + + if (pwrseq->power_off_delay_us) +@@ -96,6 +94,12 @@ + } + } + ++static void mmc_pwrseq_simple_power_off(struct mmc_host *host) ++{ ++ struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); ++ __mmc_pwrseq_simple_power_off(pwrseq); ++} ++ + static const struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = { + .pre_power_on = mmc_pwrseq_simple_pre_power_on, + .post_power_on = mmc_pwrseq_simple_post_power_on, +@@ -151,9 +155,18 @@ + return 0; + } + ++static void mmc_pwrseq_simple_shutdown(struct platform_device *pdev) ++{ ++ struct mmc_pwrseq_simple *pwrseq = platform_get_drvdata(pdev); ++ ++ dev_info(&pdev->dev, "Turning off mmc\n"); ++ __mmc_pwrseq_simple_power_off(pwrseq); ++} ++ + static struct platform_driver mmc_pwrseq_simple_driver = { + .probe = mmc_pwrseq_simple_probe, + .remove = mmc_pwrseq_simple_remove, ++ .shutdown = mmc_pwrseq_simple_shutdown, + .driver = { + .name = "pwrseq_simple", + .of_match_table = mmc_pwrseq_simple_of_match, +--- a//drivers/phy/rockchip/phy-rockchip-typec.c ++++ b/drivers/phy/rockchip/phy-rockchip-typec.c +@@ -40,6 +40,7 @@ + #include <linux/clk-provider.h> + #include <linux/delay.h> + #include <linux/extcon.h> ++#include <linux/extcon-provider.h> + #include <linux/io.h> + #include <linux/iopoll.h> + #include <linux/kernel.h> +@@ -1160,6 +1161,19 @@ + dev_err(dev, "Invalid or missing extcon\n"); + return PTR_ERR(tcphy->extcon); + } ++ } else { ++ extcon_set_property_capability(tcphy->extcon, EXTCON_USB, ++ EXTCON_PROP_USB_SS); ++ extcon_set_property_capability(tcphy->extcon, EXTCON_USB_HOST, ++ EXTCON_PROP_USB_SS); ++ extcon_set_property_capability(tcphy->extcon, EXTCON_DISP_DP, ++ EXTCON_PROP_USB_SS); ++ extcon_set_property_capability(tcphy->extcon, EXTCON_USB, ++ EXTCON_PROP_USB_TYPEC_POLARITY); ++ extcon_set_property_capability(tcphy->extcon, EXTCON_USB_HOST, ++ EXTCON_PROP_USB_TYPEC_POLARITY); ++ extcon_set_property_capability(tcphy->extcon, EXTCON_DISP_DP, ++ EXTCON_PROP_USB_TYPEC_POLARITY); + } + + pm_runtime_enable(dev); +--- a//drivers/power/supply/Kconfig ++++ b/drivers/power/supply/Kconfig +@@ -116,6 +116,12 @@ + Say Y here to enable support for battery on Motorola + phones and tablets such as droid 4. + ++config BATTERY_CW2015 ++ tristate "CW2015 Battery driver" ++ help ++ Say Y here to enable support for the cellwise cw2015 ++ battery fuel gauge (used in the Pinebook Pro & others) ++ + config BATTERY_DS2760 + tristate "DS2760 battery driver (HP iPAQ & others)" + depends on W1 +--- a/drivers/power/supply/Makefile ++++ b/drivers/power/supply/Makefile +@@ -24,6 +24,7 @@ + obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o + obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o + obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o ++obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o + obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o + obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o + obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o +--- a/drivers/power/supply/cw2015_battery.c ++++ b/drivers/power/supply/cw2015_battery.c +@@ -0,0 +1,954 @@ ++/* ++ * Fuel gauge driver for CellWise 2013 / 2015 ++ * ++ * Copyright (C) 2012, RockChip ++ * Copyright (C) 2019, Tobias Schramm ++ * ++ * Authors: xuhuicong <xhc@rock-chips.com> ++ * Authors: Tobias Schramm <tobias@t-sys.eu> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/i2c.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/of_gpio.h> ++#include <linux/platform_device.h> ++#include <linux/power_supply.h> ++#include <linux/slab.h> ++#include <linux/timekeeping.h> ++#include <linux/workqueue.h> ++ ++#include <linux/power/cw2015_battery.h> ++ ++static int dbg_enable; ++module_param_named(dbg_level, dbg_enable, int, 0644); ++ ++#define cw_printk(args...) \ ++ do { \ ++ if (dbg_enable) { \ ++ pr_info(args); \ ++ } \ ++ } while (0) ++ ++ ++#define PREFIX "cellwise," ++ ++static int cw_read(struct i2c_client *client, u8 reg, u8 buf[]) ++{ ++ return i2c_smbus_read_i2c_block_data(client, reg, 1, buf); ++} ++ ++static int cw_write(struct i2c_client *client, u8 reg, u8 const buf[]) ++{ ++ return i2c_smbus_write_i2c_block_data(client, reg, 1, &buf[0]); ++} ++ ++static int cw_read_word(struct i2c_client *client, u8 reg, u8 buf[]) ++{ ++ return i2c_smbus_read_i2c_block_data(client, reg, 2, buf); ++} ++ ++int cw_update_config_info(struct cw_battery *cw_bat) ++{ ++ int ret; ++ u8 reg_val; ++ u8 i; ++ u8 reset_val; ++ ++ cw_printk("[FGADC] test config_info = 0x%x\n", ++ cw_bat->plat_data.cw_bat_config_info[0]); ++ ++ /* make sure no in sleep mode */ ++ ret = cw_read(cw_bat->client, CW2015_REG_MODE, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ reset_val = reg_val; ++ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { ++ dev_err(&cw_bat->client->dev, ++ "device in sleep mode, cannot update battery info\n"); ++ return -1; ++ } ++ ++ /* update new battery info */ ++ for (i = 0; i < CW2015_SIZE_BATINFO; i++) { ++ ret = ++ cw_write(cw_bat->client, CW2015_REG_BATINFO + i, ++ (u8 *)&cw_bat->plat_data.cw_bat_config_info[i]); ++ ++ if (ret < 0) ++ return ret; ++ } ++ ++ reg_val |= CW2015_CONFIG_UPDATE_FLG; /* set UPDATE_FLAG */ ++ reg_val &= ~CW2015_MASK_ATHD; /* clear ATHD */ ++ reg_val |= CW2015_ATHD(cw_bat->alert_level); /* set CW2015_ATHD */ ++ ret = cw_write(cw_bat->client, CW2015_REG_CONFIG, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ /* check 2015/cw2013 for CW2015_ATHD & update_flag */ ++ ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) { ++ dev_info(&cw_bat->client->dev, ++ "update flag for new battery info have not set..\n"); ++ } ++ ++ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) ++ dev_info(&cw_bat->client->dev, "the new CW2015_ATHD have not set..\n"); ++ ++ /* reset */ ++ reset_val &= ~(CW2015_MODE_RESTART); ++ reg_val = reset_val | CW2015_MODE_RESTART; ++ ret = cw_write(cw_bat->client, CW2015_REG_MODE, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ msleep(10); ++ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val); ++ if (ret < 0) ++ return ret; ++ ++ cw_printk("cw2015 update config success!\n"); ++ ++ return 0; ++} ++ ++static int cw_init(struct cw_battery *cw_bat) ++{ ++ int ret; ++ int i; ++ u8 reg_val = CW2015_MODE_SLEEP; ++ ++ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { ++ reg_val = CW2015_MODE_NORMAL; ++ ret = cw_write(cw_bat->client, CW2015_REG_MODE, ®_val); ++ if (ret < 0) ++ return ret; ++ } ++ ++ ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) { ++ dev_info(&cw_bat->client->dev, "the new CW2015_ATHD have not set\n"); ++ reg_val &= ~CW2015_MASK_ATHD; /* clear CW2015_ATHD */ ++ reg_val |= ~CW2015_ATHD(cw_bat->alert_level); /* set CW2015_ATHD */ ++ ret = cw_write(cw_bat->client, CW2015_REG_CONFIG, ®_val); ++ if (ret < 0) ++ return ret; ++ } ++ ++ ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) { ++ cw_printk("update config flg is true, need update config\n"); ++ ret = cw_update_config_info(cw_bat); ++ if (ret < 0) { ++ dev_info(&cw_bat->client->dev, ++ "update flag for new battery info have not set\n"); ++ return ret; ++ } ++ } else { ++ for (i = 0; i < CW2015_SIZE_BATINFO; i++) { ++ ret = cw_read(cw_bat->client, (CW2015_REG_BATINFO + i), ++ ®_val); ++ if (ret < 0) ++ return ret; ++ ++ if (cw_bat->plat_data.cw_bat_config_info[i] != reg_val) ++ break; ++ } ++ ++ if (i != CW2015_SIZE_BATINFO) { ++ dev_info(&cw_bat->client->dev, ++ "update flag for new battery info have not set\n"); ++ ret = cw_update_config_info(cw_bat); ++ if (ret < 0) ++ return ret; ++ } ++ } ++ ++ for (i = 0; i < CW2015_READ_TRIES; i++) { ++ ret = cw_read(cw_bat->client, CW2015_REG_SOC, ®_val); ++ if (ret < 0) ++ return ret; ++ else if (reg_val <= 100) // SOC can't be more than 100 % ++ break; ++ msleep(120); ++ } ++ ++ if (i >= CW2015_READ_TRIES) { ++ reg_val = CW2015_MODE_SLEEP; ++ ret = cw_write(cw_bat->client, CW2015_REG_MODE, ®_val); ++ dev_info(&cw_bat->client->dev, "report battery capacity error"); ++ return -1; ++ } ++ ++ cw_printk("cw2015 init success!\n"); ++ return 0; ++} ++ ++static int check_charger_online(struct device *dev, void *data) { ++ struct device *cw_dev = data; ++ struct power_supply *supply = dev_get_drvdata(dev); ++ union power_supply_propval val; ++ ++ if (supply->desc->type == POWER_SUPPLY_TYPE_BATTERY) { ++ dev_dbg(cw_dev, "Skipping power supply %s since it is a battery\n", dev_name(dev)); ++ return 0; // Bail out, not a charger ++ } ++ if(!supply->desc->get_property(supply, POWER_SUPPLY_PROP_ONLINE, &val)) { ++ return val.intval; ++ } else { ++ dev_dbg(cw_dev, "Skipping power supply %s since it does not have an online property\n", dev_name(dev)); ++ } ++ return 0; ++} ++ ++#ifdef CONFIG_OF ++static int device_parent_match_of_node(struct device *dev, const void *np) { ++ while(dev) { ++ if(dev->of_node == np) { ++ return 1; ++ } ++ dev = dev->parent; ++ } ++ return 0; ++} ++#endif ++ ++static int get_charge_state(struct cw_battery *cw_bat) ++{ ++#ifdef CONFIG_OF ++ int i = 0, online = 0; ++ struct device_node* supply_of; ++ struct device *cw_dev = &cw_bat->client->dev; ++ if (!cw_dev->of_node) { ++ dev_dbg(cw_dev, "Charger does not have an of node, scanning all supplies\n"); ++#endif ++ return !!class_for_each_device(power_supply_class, NULL, cw_dev, check_charger_online); ++#ifdef CONFIG_OF ++ } ++ do { ++ struct device *supply_dev; ++ dev_dbg(cw_dev, "Scanning linked supplies of %s\n", cw_dev->of_node->name); ++ supply_of = of_parse_phandle(cw_dev->of_node, "power-supplies", i++); ++ if (!supply_of) { ++ dev_dbg(cw_dev, "Got empty of node, scan done\n"); ++ break; ++ } ++ dev_dbg(cw_dev, "Got power supply %s\n", supply_of->name); ++ supply_dev = class_find_device(power_supply_class, NULL, supply_of, device_parent_match_of_node); ++ if (supply_dev) { ++ online = check_charger_online(supply_dev, NULL); ++ dev_dbg(supply_dev, "Charger online: %d\n", online); ++ put_device(supply_dev); ++ } else { ++ dev_warn(cw_dev, "Failed to get device for device node %s\n", supply_of->name); ++ } ++ of_node_put(supply_of); ++ } while(!online); ++ return online; ++#endif ++} ++ ++static int cw_por(struct cw_battery *cw_bat) ++{ ++ int ret; ++ unsigned char reset_val; ++ ++ reset_val = CW2015_MODE_SLEEP; ++ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val); ++ if (ret < 0) ++ return ret; ++ reset_val = CW2015_MODE_NORMAL; ++ msleep(20); ++ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val); ++ if (ret < 0) ++ return ret; ++ ret = cw_init(cw_bat); ++ if (ret) ++ return ret; ++ return 0; ++} ++ ++static int cw_get_capacity(struct cw_battery *cw_bat) ++{ ++ int cw_capacity; ++ int ret; ++ unsigned char reg_val[2]; ++ ++ static int reset_loop; ++ static int charging_loop; ++ static int discharging_loop; ++ static int jump_flag; ++ static int charging_5_loop; ++ int sleep_cap; ++ ++ ret = cw_read_word(cw_bat->client, CW2015_REG_SOC, reg_val); ++ if (ret < 0) ++ return ret; ++ ++ cw_capacity = reg_val[0]; ++ ++ if ((cw_capacity < 0) || (cw_capacity > 100)) { ++ cw_printk("Error: cw_capacity = %d\n", cw_capacity); ++ reset_loop++; ++ if (reset_loop > ++ (CW2015_BATTERY_CAPACITY_ERROR / cw_bat->monitor_sec)) { ++ cw_por(cw_bat); ++ reset_loop = 0; ++ } ++ return cw_bat->capacity; ++ } else { ++ reset_loop = 0; ++ } ++ ++ /* case 1 : aviod swing */ ++ if (((cw_bat->charger_mode > 0) && ++ (cw_capacity <= cw_bat->capacity - 1) && ++ (cw_capacity > cw_bat->capacity - 9)) || ++ ((cw_bat->charger_mode == 0) && ++ (cw_capacity == (cw_bat->capacity + 1)))) { ++ if (!(cw_capacity == 0 && cw_bat->capacity <= 2)) ++ cw_capacity = cw_bat->capacity; ++ } ++ ++ /* case 2 : aviod no charge full */ ++ if ((cw_bat->charger_mode > 0) && ++ (cw_capacity >= 95) && (cw_capacity <= cw_bat->capacity)) { ++ cw_printk("Chaman join no charge full\n"); ++ charging_loop++; ++ if (charging_loop > ++ (CW2015_BATTERY_UP_MAX_CHANGE / cw_bat->monitor_sec)) { ++ cw_capacity = (cw_bat->capacity + 1) <= 100 ? ++ (cw_bat->capacity + 1) : 100; ++ charging_loop = 0; ++ jump_flag = 1; ++ } else { ++ cw_capacity = cw_bat->capacity; ++ } ++ } ++ ++ /* case 3 : avoid battery level jump to CW_BAT */ ++ if ((cw_bat->charger_mode == 0) && ++ (cw_capacity <= cw_bat->capacity) && ++ (cw_capacity >= 90) && (jump_flag == 1)) { ++ cw_printk("Chaman join no charge full discharging\n"); ++#ifdef CONFIG_PM ++ if (cw_bat->suspend_resume_mark == 1) { ++ cw_bat->suspend_resume_mark = 0; ++ sleep_cap = (cw_bat->after.tv_sec + ++ discharging_loop * ++ (cw_bat->monitor_sec / 1000)) / ++ (CW2015_BATTERY_DOWN_MAX_CHANGE / 1000); ++ cw_printk("sleep_cap = %d\n", sleep_cap); ++ ++ if (cw_capacity >= cw_bat->capacity - sleep_cap) { ++ return cw_capacity; ++ } else { ++ if (!sleep_cap) ++ discharging_loop = discharging_loop + ++ 1 + cw_bat->after.tv_sec / ++ (cw_bat->monitor_sec / 1000); ++ else ++ discharging_loop = 0; ++ cw_printk("discharging_loop = %d\n", ++ discharging_loop); ++ return cw_bat->capacity - sleep_cap; ++ } ++ } ++#endif ++ discharging_loop++; ++ if (discharging_loop > ++ (CW2015_BATTERY_DOWN_MAX_CHANGE / cw_bat->monitor_sec)) { ++ if (cw_capacity >= cw_bat->capacity - 1) ++ jump_flag = 0; ++ else ++ cw_capacity = cw_bat->capacity - 1; ++ ++ discharging_loop = 0; ++ } else { ++ cw_capacity = cw_bat->capacity; ++ } ++ } ++ ++ /* case 4 : avoid battery level is 0% when long time charging */ ++ if ((cw_bat->charger_mode > 0) && (cw_capacity == 0)) { ++ charging_5_loop++; ++ if (charging_5_loop > ++ CW2015_BATTERY_CHARGING_ZERO / cw_bat->monitor_sec) { ++ cw_por(cw_bat); ++ charging_5_loop = 0; ++ } ++ } else if (charging_5_loop != 0) { ++ charging_5_loop = 0; ++ } ++#ifdef CONFIG_PM ++ if (cw_bat->suspend_resume_mark == 1) ++ cw_bat->suspend_resume_mark = 0; ++#endif ++ return cw_capacity; ++} ++ ++static int cw_get_voltage(struct cw_battery *cw_bat) ++{ ++ int ret; ++ u8 reg_val[2]; ++ u16 value16, value16_1, value16_2, value16_3; ++ int voltage; ++ int res1, res2; ++ ++ ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val); ++ if (ret < 0) ++ return ret; ++ value16 = (reg_val[0] << 8) + reg_val[1]; ++ ++ ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val); ++ if (ret < 0) ++ return ret; ++ value16_1 = (reg_val[0] << 8) + reg_val[1]; ++ ++ ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val); ++ if (ret < 0) ++ return ret; ++ value16_2 = (reg_val[0] << 8) + reg_val[1]; ++ ++ if (value16 > value16_1) { ++ value16_3 = value16; ++ value16 = value16_1; ++ value16_1 = value16_3; ++ } ++ ++ if (value16_1 > value16_2) { ++ value16_3 = value16_1; ++ value16_1 = value16_2; ++ value16_2 = value16_3; ++ } ++ ++ if (value16 > value16_1) { ++ value16_3 = value16; ++ value16 = value16_1; ++ value16_1 = value16_3; ++ } ++ ++ voltage = value16_1 * 312 / 1024; ++ ++ if (cw_bat->plat_data.divider_high && ++ cw_bat->plat_data.divider_low) { ++ res1 = cw_bat->plat_data.divider_high; ++ res2 = cw_bat->plat_data.divider_low; ++ voltage = voltage * (res1 + res2) / res2; ++ } ++ ++ dev_dbg(&cw_bat->client->dev, "the cw201x voltage=%d,reg_val=%x %x\n", ++ voltage, reg_val[0], reg_val[1]); ++ return voltage; ++} ++ ++/*This function called when get RRT from cw2015*/ ++static int cw_get_time_to_empty(struct cw_battery *cw_bat) ++{ ++ int ret; ++ u8 reg_val; ++ u16 value16; ++ ++ ret = cw_read(cw_bat->client, CW2015_REG_RRT_ALERT, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ value16 = reg_val; ++ ++ ret = cw_read(cw_bat->client, CW2015_REG_RRT_ALERT + 1, ®_val); ++ if (ret < 0) ++ return ret; ++ ++ value16 = ((value16 << 8) + reg_val) & CW2015_MASK_SOC; ++ return value16; ++} ++ ++static void cw_update_charge_status(struct cw_battery *cw_bat) ++{ ++ int cw_charger_mode; ++ ++ cw_charger_mode = get_charge_state(cw_bat); ++ if (cw_bat->charger_mode != cw_charger_mode) { ++ cw_bat->charger_mode = cw_charger_mode; ++ cw_bat->bat_change = 1; ++ if (cw_charger_mode) ++ cw_bat->charge_count++; ++ } ++} ++ ++static void cw_update_capacity(struct cw_battery *cw_bat) ++{ ++ int cw_capacity; ++ ++ cw_capacity = cw_get_capacity(cw_bat); ++ if ((cw_capacity >= 0) && (cw_capacity <= 100) && ++ (cw_bat->capacity != cw_capacity)) { ++ cw_bat->capacity = cw_capacity; ++ cw_bat->bat_change = 1; ++ } ++} ++ ++static void cw_update_vol(struct cw_battery *cw_bat) ++{ ++ int ret; ++ ++ ret = cw_get_voltage(cw_bat); ++ if ((ret >= 0) && (cw_bat->voltage != ret)) ++ cw_bat->voltage = ret; ++} ++ ++static void cw_update_status(struct cw_battery *cw_bat) ++{ ++ int status; ++ ++ if (cw_bat->charger_mode > 0) { ++ if (cw_bat->capacity >= 100) ++ status = POWER_SUPPLY_STATUS_FULL; ++ else ++ status = POWER_SUPPLY_STATUS_CHARGING; ++ } else { ++ status = POWER_SUPPLY_STATUS_DISCHARGING; ++ } ++ ++ if (cw_bat->status != status) { ++ cw_bat->status = status; ++ cw_bat->bat_change = 1; ++ } ++} ++ ++static void cw_update_time_to_empty(struct cw_battery *cw_bat) ++{ ++ int ret; ++ ++ ret = cw_get_time_to_empty(cw_bat); ++ if ((ret >= 0) && (cw_bat->time_to_empty != ret)) { ++ cw_bat->time_to_empty = ret; ++ cw_bat->bat_change = 1; ++ } ++} ++ ++static void cw_bat_work(struct work_struct *work) ++{ ++ struct delayed_work *delay_work; ++ struct cw_battery *cw_bat; ++ int ret; ++ u8 reg_val; ++ int i = 0; ++ ++ delay_work = container_of(work, struct delayed_work, work); ++ cw_bat = ++ container_of(delay_work, struct cw_battery, battery_delay_work); ++ ++ /* Add for battery swap start */ ++ ret = cw_read(cw_bat->client, CW2015_REG_MODE, ®_val); ++ if (ret < 0) { ++ cw_bat->bat_mode = MODE_VIRTUAL; ++ cw_bat->bat_change = 1; ++ } else { ++ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { ++ for (i = 0; i < 5; i++) { ++ if (cw_por(cw_bat) == 0) ++ break; ++ } ++ } ++ cw_update_capacity(cw_bat); ++ cw_update_vol(cw_bat); ++ cw_update_charge_status(cw_bat); ++ cw_update_status(cw_bat); ++ cw_update_time_to_empty(cw_bat); ++ } ++ /* Add for battery swap end */ ++ cw_printk("charger_mod = %d\n", cw_bat->charger_mode); ++ cw_printk("status = %d\n", cw_bat->status); ++ cw_printk("capacity = %d\n", cw_bat->capacity); ++ cw_printk("voltage = %d\n", cw_bat->voltage); ++ ++#ifdef CONFIG_PM ++ if (cw_bat->suspend_resume_mark == 1) ++ cw_bat->suspend_resume_mark = 0; ++#endif ++ ++ if (cw_bat->bat_change == 1) { ++ power_supply_changed(cw_bat->rk_bat); ++ cw_bat->bat_change = 0; ++ } ++ queue_delayed_work(cw_bat->battery_workqueue, ++ &cw_bat->battery_delay_work, ++ msecs_to_jiffies(cw_bat->monitor_sec)); ++} ++ ++static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat) ++{ ++ return cw_bat->time_to_empty > 0 && cw_bat->time_to_empty < CW2015_MASK_SOC && ++ cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING; ++} ++ ++static int cw_battery_get_property(struct power_supply *psy, ++ enum power_supply_property psp, ++ union power_supply_propval *val) ++{ ++ int ret = 0; ++ struct cw_battery *cw_bat; ++ ++ cw_bat = power_supply_get_drvdata(psy); ++ switch (psp) { ++ case POWER_SUPPLY_PROP_CAPACITY: ++ val->intval = cw_bat->capacity; ++ if (cw_bat->bat_mode == MODE_VIRTUAL) ++ val->intval = CW2015_VIRTUAL_SOC; ++ break; ++ case POWER_SUPPLY_PROP_STATUS: ++ val->intval = cw_bat->status; ++ if (cw_bat->bat_mode == MODE_VIRTUAL) ++ val->intval = CW2015_VIRTUAL_STATUS; ++ break; ++ ++ case POWER_SUPPLY_PROP_HEALTH: ++ val->intval = POWER_SUPPLY_HEALTH_GOOD; ++ break; ++ case POWER_SUPPLY_PROP_PRESENT: ++ val->intval = cw_bat->voltage <= 0 ? 0 : 1; ++ if (cw_bat->bat_mode == MODE_VIRTUAL) ++ val->intval = CW2015_VIRTUAL_PRESET; ++ break; ++ ++ case POWER_SUPPLY_PROP_VOLTAGE_NOW: ++ val->intval = cw_bat->voltage * 1000; ++ if (cw_bat->bat_mode == MODE_VIRTUAL) ++ val->intval = CW2015_VIRTUAL_VOLTAGE * 1000; ++ break; ++ ++ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: ++ if (cw_battery_valid_time_to_empty(cw_bat)) { ++ val->intval = cw_bat->time_to_empty; ++ } else { ++ val->intval = 0; ++ } ++ if (cw_bat->bat_mode == MODE_VIRTUAL) ++ val->intval = CW2015_VIRTUAL_TIME2EMPTY; ++ break; ++ ++ case POWER_SUPPLY_PROP_TECHNOLOGY: ++ val->intval = POWER_SUPPLY_TECHNOLOGY_LION; ++ break; ++ ++ case POWER_SUPPLY_PROP_CHARGE_COUNTER: ++ val->intval = cw_bat->charge_count; ++ break; ++ ++ case POWER_SUPPLY_PROP_CHARGE_FULL: ++ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: ++ val->intval = cw_bat->plat_data.design_capacity * 1000; ++ break; ++ ++ case POWER_SUPPLY_PROP_TEMP: ++ val->intval = CW2015_VIRTUAL_TEMPERATURE; ++ break; ++ ++ case POWER_SUPPLY_PROP_CURRENT_NOW: ++ if (cw_battery_valid_time_to_empty(cw_bat)) { ++ // calculate remaining capacity ++ val->intval = cw_bat->plat_data.design_capacity * 1000; ++ val->intval = val->intval * cw_bat->capacity / 100; ++ ++ // estimate current based on time to empty (in minutes) ++ val->intval = 60 * val->intval / cw_bat->time_to_empty; ++ } else { ++ val->intval = 0; ++ } ++ ++ if (cw_bat->bat_mode == MODE_VIRTUAL) ++ val->intval = CW2015_VIRTUAL_CURRENT; ++ break; ++ ++ default: ++ break; ++ } ++ return ret; ++} ++ ++static enum power_supply_property cw_battery_properties[] = { ++ POWER_SUPPLY_PROP_CAPACITY, ++ POWER_SUPPLY_PROP_STATUS, ++ POWER_SUPPLY_PROP_HEALTH, ++ POWER_SUPPLY_PROP_PRESENT, ++ POWER_SUPPLY_PROP_VOLTAGE_NOW, ++ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, ++ POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_CHARGE_COUNTER, ++ POWER_SUPPLY_PROP_CHARGE_FULL, ++ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, ++ POWER_SUPPLY_PROP_TEMP, ++ POWER_SUPPLY_PROP_CURRENT_NOW, ++}; ++ ++static const struct power_supply_desc cw2015_bat_desc = { ++ .name = "cw2015-battery", ++ .type = POWER_SUPPLY_TYPE_BATTERY, ++ .properties = cw_battery_properties, ++ .num_properties = ARRAY_SIZE(cw_battery_properties), ++ .get_property = cw_battery_get_property, ++}; ++ ++#ifdef CONFIG_OF ++static int cw2015_parse_dt(struct cw_battery *cw_bat) ++{ ++ struct device *dev = &cw_bat->client->dev; ++ struct device_node *node = dev->of_node; ++ struct property *prop; ++ int length; ++ u32 value; ++ int ret; ++ struct cw_bat_platform_data *data = &cw_bat->plat_data; ++ ++ if (!node) ++ return -ENODEV; ++ ++ memset(data, 0, sizeof(*data)); ++ ++ /* determine the number of config info */ ++ prop = of_find_property(node, PREFIX"bat-config-info", &length); ++ if (!prop) ++ return -EINVAL; ++ ++ length /= sizeof(u32); ++ ++ if (length > 0) { ++ size_t size = sizeof(*data->cw_bat_config_info) * length; ++ ++ data->cw_bat_config_info = devm_kzalloc(dev, size, GFP_KERNEL); ++ if (!data->cw_bat_config_info) ++ return -ENOMEM; ++ ++ ret = of_property_read_u32_array(node, PREFIX"bat-config-info", ++ data->cw_bat_config_info, ++ length); ++ if (ret < 0) ++ return ret; ++ } ++ ++ cw_bat->bat_mode = MODE_BATTERY; ++ cw_bat->monitor_sec = CW2015_DEFAULT_MONITOR_SEC * CW2015_TIMER_MS_COUNTS; ++ ++ prop = of_find_property(node, PREFIX"voltage-divider", &length); ++ if (prop) { ++ length /= sizeof(u32); ++ if (length != 2) { ++ dev_err(dev, "Length of voltage divider array must be 2, not %u\n", length); ++ return -EINVAL; ++ } ++ ret = of_property_read_u32_index(node, PREFIX"voltage-divider", 0, &data->divider_high); ++ if (ret) { ++ dev_err(dev, "Failed to read value of high side voltage divider resistor: %d\n", ret); ++ return ret; ++ } ++ ret = of_property_read_u32_index(node, PREFIX"voltage-divider", 1, &data->divider_low); ++ if (ret) { ++ dev_err(dev, "Failed to read value of low side voltage divider resistor: %d\n", ret); ++ return ret; ++ } ++ } ++ ++ ret = of_property_read_u32(node, PREFIX"divider-res2", &value); ++ if (ret < 0) ++ value = 0; ++ data->divider_low = value; ++ ++ ret = of_property_read_u32(node, PREFIX"virtual-power", &value); ++ if (ret < 0) ++ value = 0; ++ cw_bat->bat_mode = value; ++ ++ ret = of_property_read_u32(node, PREFIX"monitor-interval", &value); ++ if (ret < 0) ++ dev_err(dev, "monitor-interval missing!\n"); ++ else ++ cw_bat->monitor_sec = value * CW2015_TIMER_MS_COUNTS; ++ ++ ret = of_property_read_u32(node, PREFIX"design-capacity", &value); ++ if (ret < 0) { ++ dev_err(dev, "design-capacity missing!\n"); ++ data->design_capacity = 2000; ++ } else { ++ data->design_capacity = value; ++ } ++ ++ of_property_read_u8(node, PREFIX"alert-level", &cw_bat->alert_level); ++ if (cw_bat->alert_level > 100) { ++ dev_err(dev, "invalid alert_level, clamping to 100 %%\n"); ++ cw_bat->alert_level = 100; ++ } ++ ++ return 0; ++} ++#else ++static int cw2015_parse_dt(struct cw_battery *cw_bat) ++{ ++ return -ENODEV; ++} ++#endif ++ ++static int cw_bat_probe(struct i2c_client *client, ++ const struct i2c_device_id *id) ++{ ++ int ret; ++ struct cw_battery *cw_bat; ++ struct power_supply_config psy_cfg = {0}; ++ ++ cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL); ++ if (!cw_bat) { ++ dev_err(&client->dev, ++ "fail to allocate memory for cw2015\n"); ++ return -ENOMEM; ++ } ++ ++ i2c_set_clientdata(client, cw_bat); ++ cw_bat->client = client; ++ ++ ret = cw2015_parse_dt(cw_bat); ++ if (ret < 0) { ++ dev_err(&client->dev, ++ "failed to find cw2015 platform data\n"); ++ return ret; ++ } ++ ++ cw_bat->capacity = 1; ++ cw_bat->voltage = 0; ++ cw_bat->status = 0; ++ cw_bat->suspend_resume_mark = 0; ++ cw_bat->charger_mode = CW2015_NO_CHARGING; ++ cw_bat->bat_change = 0; ++ ++ ret = cw_init(cw_bat); ++ if (ret) { ++ pr_err("%s cw_init error\n", __func__); ++ return ret; ++ } ++ ++ psy_cfg.drv_data = cw_bat; ++ ++ cw_bat->rk_bat = devm_power_supply_register(&client->dev, ++ &cw2015_bat_desc, &psy_cfg); ++ if (IS_ERR(cw_bat->rk_bat)) { ++ dev_err(&cw_bat->client->dev, ++ "power supply register rk_bat error\n"); ++ return -1; ++ } ++ ++ cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery"); ++ INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work); ++ queue_delayed_work(cw_bat->battery_workqueue, ++ &cw_bat->battery_delay_work, msecs_to_jiffies(10)); ++ ++ dev_info(&cw_bat->client->dev, ++ "cw2015/cw2013 driver v1.2 probe sucess\n"); ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int cw_bat_suspend(struct device *dev) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct cw_battery *cw_bat = i2c_get_clientdata(client); ++ ktime_get_boottime_ts64(&cw_bat->suspend_time_before); ++ cancel_delayed_work(&cw_bat->battery_delay_work); ++ return 0; ++} ++ ++static int cw_bat_resume(struct device *dev) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct cw_battery *cw_bat = i2c_get_clientdata(client); ++ cw_bat->suspend_resume_mark = 1; ++ ktime_get_boottime_ts64(&cw_bat->after); ++ cw_bat->after = timespec64_sub(cw_bat->after, ++ cw_bat->suspend_time_before); ++ queue_delayed_work(cw_bat->battery_workqueue, ++ &cw_bat->battery_delay_work, msecs_to_jiffies(2)); ++ return 0; ++} ++ ++static const struct dev_pm_ops cw_bat_pm_ops = { ++ .suspend = cw_bat_suspend, ++ .resume = cw_bat_resume, ++}; ++#endif ++ ++static int cw_bat_remove(struct i2c_client *client) ++{ ++ struct cw_battery *cw_bat = i2c_get_clientdata(client); ++ ++ dev_dbg(&cw_bat->client->dev, "%s\n", __func__); ++ cancel_delayed_work(&cw_bat->battery_delay_work); ++ return 0; ++} ++ ++static const struct i2c_device_id cw_bat_id_table[] = { ++ { "cw201x", 0 }, ++ { "cw2013", 0 }, ++ { "cw2015", 0 }, ++ {} ++}; ++ ++static const struct of_device_id cw2015_of_match[] = { ++ { .compatible = PREFIX"cw201x" }, ++ { .compatible = PREFIX"cw2013" }, ++ { .compatible = PREFIX"cw2015" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, cw2015_of_match); ++ ++static const struct of_device_id max17040_of_match[] = { ++ { .compatible = "maxim,max17040" }, ++ { .compatible = "maxim,max77836-battery" }, ++ { }, ++}; ++ ++MODULE_DEVICE_TABLE(of, max17040_of_match); ++ ++static struct i2c_driver cw_bat_driver = { ++ .driver = { ++ .name = PREFIX"cw201x", ++#ifdef CONFIG_PM ++ .pm = &cw_bat_pm_ops, ++#endif ++ }, ++ .probe = cw_bat_probe, ++ .remove = cw_bat_remove, ++ .id_table = cw_bat_id_table, ++}; ++ ++static int __init cw_bat_init(void) ++{ ++ return i2c_add_driver(&cw_bat_driver); ++} ++ ++static void __exit cw_bat_exit(void) ++{ ++ i2c_del_driver(&cw_bat_driver); ++} ++ ++module_init(cw_bat_init); ++module_exit(cw_bat_exit); ++ ++MODULE_AUTHOR("xhc<xhc@rock-chips.com>"); ++MODULE_DESCRIPTION("cw2015/cw2013 battery driver"); ++MODULE_LICENSE("GPL"); +--- a/drivers/tty/serdev/core.c ++++ b/drivers/tty/serdev/core.c +@@ -431,11 +431,22 @@ + return 0; + } + ++static void serdev_drv_shutdown(struct device *dev) ++{ ++ const struct serdev_device_driver *sdrv; ++ if (dev->driver) { ++ sdrv = to_serdev_device_driver(dev->driver); ++ if (sdrv->shutdown) ++ sdrv->shutdown(to_serdev_device(dev)); ++ } ++} ++ + static struct bus_type serdev_bus_type = { + .name = "serial", + .match = serdev_device_match, + .probe = serdev_drv_probe, + .remove = serdev_drv_remove, ++ .shutdown = serdev_drv_shutdown, + }; + + /** +--- a/drivers/usb/typec/tcpm/tcpm.c ++++ b/drivers/usb/typec/tcpm/tcpm.c +@@ -8,6 +8,7 @@ + #include <linux/completion.h> + #include <linux/debugfs.h> + #include <linux/device.h> ++#include <linux/extcon-provider.h> + #include <linux/jiffies.h> + #include <linux/kernel.h> + #include <linux/module.h> +@@ -322,6 +323,12 @@ + /* port belongs to a self powered device */ + bool self_powered; + ++ ++#ifdef CONFIG_EXTCON ++ struct extcon_dev *extcon; ++ unsigned int *extcon_cables; ++#endif ++ + #ifdef CONFIG_DEBUG_FS + struct dentry *dentry; + struct mutex logbuffer_lock; /* log buffer access lock */ +@@ -608,6 +615,33 @@ + + #endif + ++static void tcpm_update_extcon_data(struct tcpm_port *port, bool attached) { ++#ifdef CONFIG_EXTCON ++ unsigned int *capability = port->extcon_cables; ++ if (port->data_role == TYPEC_HOST) { ++ extcon_set_state(port->extcon, EXTCON_USB, false); ++ extcon_set_state(port->extcon, EXTCON_USB_HOST, attached); ++ } else { ++ extcon_set_state(port->extcon, EXTCON_USB, true); ++ extcon_set_state(port->extcon, EXTCON_USB_HOST, attached); ++ } ++ while(*capability != EXTCON_NONE) { ++ union extcon_property_value val; ++ val.intval = true; ++ extcon_set_property(port->extcon, *capability, EXTCON_PROP_USB_SS, val); ++ val.intval = (port->polarity == TYPEC_POLARITY_CC2); ++ extcon_set_property(port->extcon, *capability, ++ EXTCON_PROP_USB_TYPEC_POLARITY, val); ++ extcon_sync(port->extcon, *capability); ++ capability++; ++ } ++ tcpm_log(port, "Extcon update (%s): %s, %s", ++ attached ? "attached" : "detached", ++ port->data_role == TYPEC_HOST ? "host" : "device", ++ port->polarity == TYPEC_POLARITY_CC1 ? "normal" : "flipped"); ++#endif ++} ++ + static int tcpm_pd_transmit(struct tcpm_port *port, + enum tcpm_transmit_type type, + const struct pd_message *msg) +@@ -797,10 +831,11 @@ + else + orientation = TYPEC_ORIENTATION_REVERSE; + +- if (data == TYPEC_HOST) ++ if (data == TYPEC_HOST) { + usb_role = USB_ROLE_HOST; +- else ++ } else { + usb_role = USB_ROLE_DEVICE; ++ } + + ret = tcpm_mux_set(port, TYPEC_STATE_USB, usb_role, orientation); + if (ret < 0) +@@ -815,6 +850,8 @@ + typec_set_data_role(port->typec_port, data); + typec_set_pwr_role(port->typec_port, role); + ++ tcpm_update_extcon_data(port, attached); ++ + return 0; + } + +@@ -1025,7 +1062,7 @@ + paltmode->mode = i; + paltmode->vdo = le32_to_cpu(payload[i]); + +- tcpm_log(port, " Alternate mode %d: SVID 0x%04x, VDO %d: 0x%08x", ++ tcpm_log(port, "Alternate mode %d: SVID 0x%04x, VDO %d: 0x%08x", + pmdata->altmodes, paltmode->svid, + paltmode->mode, paltmode->vdo); + +@@ -2730,6 +2767,8 @@ + port->hard_reset_count = 0; + + tcpm_reset_port(port); ++ ++ tcpm_update_extcon_data(port, false); + } + + static void tcpm_src_detach(struct tcpm_port *port) +@@ -4396,6 +4435,10 @@ + return nr_vdo; + } + ++unsigned int default_supported_cables[] = { ++ EXTCON_NONE ++}; ++ + static int tcpm_fw_get_caps(struct tcpm_port *port, + struct fwnode_handle *fwnode) + { +@@ -4406,6 +4449,23 @@ + if (!fwnode) + return -EINVAL; + ++#ifdef CONFIG_EXTCON ++ ret = fwnode_property_count_u32(fwnode, "extcon-cables"); ++ if (ret > 0) { ++ port->extcon_cables = devm_kzalloc(port->dev, sizeof(u32) * ret, GFP_KERNEL); ++ if (!port->extcon_cables) { ++ dev_err(port->dev, "Failed to allocate memory for extcon cable types. "\ ++ "Using default tyes"); ++ goto extcon_default; ++ } ++ fwnode_property_read_u32_array(fwnode, "extcon-cables", port->extcon_cables, ret); ++ } else { ++extcon_default: ++ dev_info(port->dev, "No cable types defined, using default cables"); ++ port->extcon_cables = default_supported_cables; ++ } ++#endif ++ + /* USB data support is optional */ + ret = fwnode_property_read_string(fwnode, "data-role", &cap_str); + if (ret == 0) { +@@ -4764,6 +4824,17 @@ + if (err < 0) + goto out_destroy_wq; + ++#ifdef CONFIG_EXTCON ++ port->extcon = devm_extcon_dev_allocate(dev, port->extcon_cables); ++ if (IS_ERR(port->extcon)) { ++ dev_err(dev, "Failed to allocate extcon device: %ld", PTR_ERR(port->extcon)); ++ goto out_destroy_wq; ++ } ++ if((err = devm_extcon_dev_register(dev, port->extcon))) { ++ dev_err(dev, "Failed to register extcon device: %d", err); ++ goto out_destroy_wq; ++ } ++#endif + if (!tcpc->config || !tcpc->config->try_role_hw) + port->try_role = port->typec_caps.prefer_role; + else +--- a/include/linux/mfd/rk808.h ++++ b/include/linux/mfd/rk808.h +@@ -622,5 +622,6 @@ + const struct regmap_irq_chip *regmap_irq_chip; + void (*pm_pwroff_fn)(void); + void (*pm_pwroff_prep_fn)(void); ++ bool use_syscore_powerdown; + }; + #endif /* __LINUX_REGULATOR_RK808_H */ +--- a/include/linux/power/cw2015_battery.h ++++ b/include/linux/power/cw2015_battery.h +@@ -0,0 +1,122 @@ ++/* ++ * Fuel gauge driver for CellWise 2013 / 2015 ++ * ++ * Copyright (C) 2012, RockChip ++ * Copyright (C) 2019, Tobias Schramm ++ * ++ * Authors: xuhuicong <xhc@rock-chips.com> ++ * Authors: Tobias Schramm <tobias@t-sys.eu> ++ * ++ * Based on rk30_adc_battery.c ++ ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef CW2015_BATTERY_H ++#define CW2015_BATTERY_H ++ ++#define CW2015_SIZE_BATINFO 64 ++ ++#define CW2015_GPIO_HIGH 1 ++#define CW2015_GPIO_LOW 0 ++ ++#define CW2015_READ_TRIES 30 ++ ++#define CW2015_REG_VERSION 0x0 ++#define CW2015_REG_VCELL 0x2 ++#define CW2015_REG_SOC 0x4 ++#define CW2015_REG_RRT_ALERT 0x6 ++#define CW2015_REG_CONFIG 0x8 ++#define CW2015_REG_MODE 0xA ++#define CW2015_REG_BATINFO 0x10 ++ ++#define CW2015_MODE_SLEEP_MASK (0x3<<6) ++#define CW2015_MODE_SLEEP (0x3<<6) ++#define CW2015_MODE_NORMAL (0x0<<6) ++#define CW2015_MODE_QUICK_START (0x3<<4) ++#define CW2015_MODE_RESTART (0xf<<0) ++ ++#define CW2015_CONFIG_UPDATE_FLG (0x01<<1) ++#define CW2015_ATHD(x) ((x)<<3) ++#define CW2015_MASK_ATHD (0x1f<<3) ++#define CW2015_MASK_SOC (0x1fff) ++ ++#define CW2015_I2C_SPEED 100000 ++#define CW2015_BATTERY_UP_MAX_CHANGE (420 * 1000) ++#define CW2015_BATTERY_DOWN_MAX_CHANGE (120 * 1000) ++#define CW2015_BATTERY_DOWN_CHANGE 60 ++#define CW2015_BATTERY_DOWN_MIN_CHANGE_RUN 30 ++#define CW2015_BATTERY_DOWN_MIN_CHANGE_SLEEP 1800 ++#define CW2015_BATTERY_JUMP_TO_ZERO (30 * 1000) ++#define CW2015_BATTERY_CAPACITY_ERROR (40 * 1000) ++#define CW2015_BATTERY_CHARGING_ZERO (1800 * 1000) ++ ++#define CW2015_DOUBLE_SERIES_BATTERY 0 ++ ++#define CW2015_CHARGING_ON 1 ++#define CW2015_NO_CHARGING 0 ++ ++#define CW2015_BATTERY_DOWN_MAX_CHANGE_RUN_AC_ONLINE 3600 ++ ++#define CW2015_NO_STANDARD_AC_BIG_CHARGE_MODE 1 ++/* #define CW2015_SYSTEM_SHUTDOWN_VOLTAGE 3400000 */ ++#define CW2015_BAT_LOW_INTERRUPT 1 ++ ++#define CW2015_USB_CHARGER_MODE 1 ++#define CW2015_AC_CHARGER_MODE 2 ++#define CW2015_QUICKSTART 0 ++ ++#define CW2015_TIMER_MS_COUNTS 1000 ++#define CW2015_DEFAULT_MONITOR_SEC 8 ++ ++/* virtual params */ ++#define CW2015_VIRTUAL_CURRENT 1000 ++#define CW2015_VIRTUAL_VOLTAGE 3888 ++#define CW2015_VIRTUAL_SOC 66 ++#define CW2015_VIRTUAL_PRESET 1 ++#define CW2015_VIRTUAL_TEMPERATURE 188 ++#define CW2015_VIRTUAL_TIME2EMPTY 60 ++#define CW2015_VIRTUAL_STATUS POWER_SUPPLY_STATUS_CHARGING ++ ++enum bat_mode { ++ MODE_BATTERY = 0, ++ MODE_VIRTUAL, ++}; ++ ++struct cw_bat_platform_data { ++ u32 divider_high; ++ u32 divider_low; ++ u32 *cw_bat_config_info; ++ int design_capacity; ++}; ++ ++struct cw_battery { ++ struct i2c_client *client; ++ struct workqueue_struct *battery_workqueue; ++ struct delayed_work battery_delay_work; ++ struct cw_bat_platform_data plat_data; ++ ++ struct power_supply *rk_bat; ++ ++#ifdef CONFIG_PM ++ struct timespec64 suspend_time_before; ++ struct timespec64 after; ++ int suspend_resume_mark; ++#endif ++ int charger_mode; ++ int capacity; ++ int voltage; ++ int status; ++ int time_to_empty; ++ int alt; ++ u32 monitor_sec; ++ u32 bat_mode; ++ int bat_change; ++ int charge_count; ++ u8 alert_level; ++}; ++ ++#endif +--- a/include/linux/serdev.h ++++ b/include/linux/serdev.h +@@ -63,6 +63,7 @@ + struct device_driver driver; + int (*probe)(struct serdev_device *); + void (*remove)(struct serdev_device *); ++ void (*shutdown)(struct serdev_device *); + }; + + static inline struct serdev_device_driver *to_serdev_device_driver(struct device_driver *d) +--- a/net/rfkill/rfkill-gpio.c ++++ b/net/rfkill/rfkill-gpio.c +@@ -148,6 +148,14 @@ + return 0; + } + ++#ifdef CONFIG_OF ++static const struct of_device_id rfkill_of_match[] = { ++ { .compatible = "rfkill,gpio", }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, rfkill_of_match); ++#endif ++ + #ifdef CONFIG_ACPI + static const struct acpi_device_id rfkill_acpi_match[] = { + { "BCM4752", RFKILL_TYPE_GPS }, +@@ -162,6 +170,9 @@ + .remove = rfkill_gpio_remove, + .driver = { + .name = "rfkill_gpio", ++#ifdef CONFIG_OF ++ .of_match_table = rfkill_of_match, ++#endif + .acpi_match_table = ACPI_PTR(rfkill_acpi_match), + }, + }; |